Eaton B-Line series open frame racks, Steel, Flat black powder coat finish, Double sided rack mounted shelf. Heavy duty, solid shelf, Four mounting spaces required, 200 lb load capacity, Shelves and #12-24 mounting hardware included
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 6 in
- Product Length Depth:
- 30 in
- Product Weight:
- 17.3 lb
- Product Width:
- 19.56 in
- Department:
- Electrical
- Product Model:
- Double sided rack mounted shelf, heavy duty, solid shelf
- Product Finish:
- Flat black powder coat
- Product Material:
- Steel
B-LINE SB596S19156SFB – Frequently Asked Questions
1) How much weight will the Eaton B-Line SB596S19156SFB rack shelf hold?
The double sided rack mounted shelf is rated for a 200 lb load. It's a solid steel shelf, so the load sits on a continuous surface rather than a vented or partial tray, which suits heavier gear like UPS units or amplifiers sitting mid-rack.
2) How many rack units does this B-Line double sided shelf take up?
Four mounting spaces (4U) are required in the rack. Plan the vertical layout around that before ordering, because the shelf bolts to the rails across all four spaces rather than a single U.
3) Will this shelf fit a standard 19 inch open frame rack?
Yes. The SB596S19156SFB measures 19.56 in wide, which is the mounting footprint for a standard 19 inch EIA rack with the flanges included, and it is built for Eaton B-Line series open frame racks. Depth is 30 in, so confirm your rack's frame depth and surrounding clearance handles a 30 inch shelf before it goes in.
4) Does the shelf come with mounting hardware or do I need to order screws separately?
Hardware is included. The shelf ships with #12-24 mounting screws, which is the thread used on B-Line open frame rack rails. No separate hardware order is needed to install it.
5) Is a solid shelf or a vented shelf better for rack equipment?
This one is solid, which gives full support under the whole footprint of a heavy unit and stops small items falling through. A vented shelf is the better pick when you are stacking gear that dumps heat upward and relies on airflow from below. For dead weight, patch gear, batteries or tools, solid is the one you want.
6) What is the finish on this B-Line shelf, and will it match my existing black open frame rack?
Flat black powder coat over steel. That's the standard finish on Eaton B-Line series open frame racks, so it matches black B-Line frames and reads consistently alongside other black-coated rack accessories in the same room.
7) How tall is the shelf itself and how much does it weigh for a one-person install?
6 in high and 17.3 lb. One person can lift it, but a 30 inch deep shelf that has to be held level while you start screws front and rear is easier with a second set of hands or the lower rail screws started first.
How fast can I get the B-LINE SB596S19156SFB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB596S19156SFB come with a warranty?
Absolutely. The B-LINE SB596S19156SFB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB596S19156SFB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB596S19156SFB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.