B-Line Eaton series open racks, Steel, Mounting spaces: 2, Flat black powder coat, Cable management ring, Used to provide cable management anywhere o

The SB563242FB ring occupies 2 mounting spaces on the rack, which matches its 3.5 in height. Plan two rack units wherever you land it on the rail.

It measures 4 in in width and 4 in in depth, with a 3.5 in height, so figure on about 4 inches of projection from the mounting rail when you check clearance to a wall, a neighboring rack, or a cabinet door.

Steel, with a flat black powder coat finish. At 2.4 lb it is a solid formed-metal ring rather than a molded plastic D-ring, so it takes repeated re-dressing of bundles without flexing or cracking.

The finish is flat black powder coat, the same finish B-Line uses on its open frame racks, so it blends with a black-painted two-post rack rather than standing out like a clear or gray zinc part.

It is made to provide cable management anywhere on the equipment rack. Anywhere you have 2 free mounting spaces on the rail, front or rear, you can land one, which is how installers stack several up a rack to create a vertical cable path between patch panels and switches.

A 4 in deep ring like the SB563242FB handles bundles at specific points, typically one per patch panel or every few rack units to guide cable to the side rails. If you are dressing a fully loaded rack of high density copper and want a continuous covered channel with slack storage, a full-height vertical manager is the better choice and rings are used to supplement it.

Order it as Eaton B-Line SB563242FB. That is the single configuration, steel with the flat black powder coat, so there is no finish or size suffix to specify.