Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 43 mounting spaces, Throat style, Closed duct unequal flange rack-open, ASTM 569
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Material Details:
- ASTM 569
- Mounting Rails:
- 12-24 panel mounting holes
- Product Height:
- 138 in
- Product Length Depth:
- 138 in
- Product Weight:
- 130 lb
- Product Width:
- 19 in
- Special Features:
- 43 mounting spaces
- Surface Finish:
- Telco gray powder coat
- Department:
- Electrical
- Product Group:
- Racks & Frames
- Product Subgroup:
- Racks
- Product Type:
- Closed duct unequal flange rack-open
- Product Details:
- Closed duct unequal flange rack-open
- Product Style:
- Throat
- Product Material:
- Steel
- Product Length:
- 138 in
B-LINE SB5761138TG – Frequently Asked Questions
1) Will 19 inch rack-mount equipment fit the B-Line SB5761138TG open frame rack?
Yes. The SB5761138TG is a 19 inch wide open frame rack with 43 mounting spaces, so it takes standard 19 inch panels and chassis. Rail holes are tapped 12-24, which is the thread most switch and patch panel hardware ships for.
2) Is this an enclosed cabinet or an open frame rack?
Open frame. The SB5761138TG is a closed duct unequal flange open rack, meaning there are no side panels or doors, just the vertical rails and the closed duct channel. Equipment is reachable from both sides, and cooling comes from the room. If you need physical security or dust control, a locking enclosure is the wrong-to-right swap.
3) Is this B-Line rack UL Listed for a commercial telecom room?
Yes, it is UL Listed. Steel construction is to ASTM 569, the hot-rolled commercial quality sheet spec, which is the material callout most institutional and government submittals ask for on open frame racks.
4) Do I need to supply my own screws for a 12-24 tapped rack?
Plan on ordering 12-24 rack screws separately, and match them to the 12-24 tapped holes in the rails. If your gear came with 10-32 or M6 hardware it will not thread into this rack.
5) What does unequal flange mean on a B-Line telco rack?
Unequal flange refers to the channel profile: the two flanges of the upright are different widths, which sets how the rack aligns to the mounting plane and where cable falls relative to the rails. The SB5761138TG uses a throat style upright with a closed duct section for cable routing inside the channel.
6) How much does this rack weigh and can one person set it?
At 130 lb and 138 inches tall, this is a two-person set minimum. Most installers anchor the base to the floor slab and tie the top to overhead ladder rack or a wall angle before loading any equipment.
7) Will the Telco gray finish match the other racks in an existing data room?
The finish is Telco gray powder coat, the standard color used across B-Line open frame telco racks, so it lines up visually with existing telco gray lineups. Powder coat over steel also takes handling and cable pulls better than wet paint.
How fast can I get the B-LINE SB5761138TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5761138TG come with a warranty?
Absolutely. The B-LINE SB5761138TG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5761138TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5761138TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.