B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$4,352.63
B-Line Eaton series open racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, clo

B-Line Eaton series open racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, clo

(No reviews yet) Write a Review

Model: SB5856108TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$4,352.63
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 58 mounting spaces, Top channel style, Seismic Zone 4, closed duct unequal flange rack, 11 gauge, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge, ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
108 in
Product Length Depth:
108 in
Product Weight:
91.25 lb
Product Width:
23 in
Special Features:
58 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, closed duct unequal flange rack
Product Details:
Seismic Zone 4, closed duct unequal flange rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5856108TG – Frequently Asked Questions

1) How many rack units does the B-Line SB5856108TG open frame rack give me?
58 mounting spaces on a 108 inch tall frame. That is the full usable panel height, so plan your equipment stack against 58 spaces rather than a nominal 45U cabinet figure. The frame is 23 inches wide.
2) What thread do the panel mounting holes take on the Eaton B-Line SB5856108TG rack?
The mounting rails are punched with 12-24 panel mounting holes, which is the standard telecom rail thread. Your equipment needs 12-24 rack screws; cage nuts and square-hole (EIA universal) hardware will not work here.
3) Is this rack rated for a high seismic area like California?
It is built as a Seismic Zone 4 rack, which is the most severe seismic classification, and it is UL Listed. It is a closed duct unequal flange design in 11 gauge ASTM A1011SS steel. Anchorage to the slab and any overhead bracing still has to follow the engineer's detail for your installation.
4) What does closed duct unequal flange mean on a telco rack, and when would I want it instead of a standard rack?
Closed duct means the vertical channel is a closed box section rather than an open C, which stiffens the upright and gives you a protected path for cable running inside the frame. Unequal flange means the front and rear flanges are different widths, so equipment mounts forward while the deeper flange carries the cable and mounting hardware. That combination is what you specify in a central office or main distribution room where seismic bracing and vertical cable management both matter; a plain open equal flange rack is the lighter, cheaper choice for a low equipment count in a non-seismic room.
5) Does the B-Line SB5856108TG come with a top channel, or do I add one?
Top channel style is how this frame is built, so the top channel is part of the rack rather than a separate add-on. That top member is your tie point for ladder rack and overhead cable runway.
6) Will this rack match the finish of the existing telco racks in my equipment room?
The finish is Telco gray powder coat over steel, the standard gray used across B-Line open frame telecom racks, so it lines up visually with an existing row of telco-gray frames. Specify by model SB5856108TG if you are adding to an established row.
7) How heavy gauge is the steel on this Eaton B-Line seismic rack?
11 gauge steel to ASTM A1011SS. That is the structural hot-rolled sheet spec, and it is the reason the frame carries a Seismic Zone 4 rating rather than a lighter commercial rating.
How fast can I get the B-LINE SB5856108TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5856108TG come with a warranty?
Absolutely. The B-LINE SB5856108TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5856108TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5856108TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!