B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$5,165.50
B-Line Eaton series open racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 67 mounting spaces, Top channel style, Seismic Zone 4, net

B-Line Eaton series open racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 67 mounting spaces, Top channel style, Seismic Zone 4, net

(No reviews yet) Write a Review

Model: SB5777140TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$5,165.50
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat, 12-24 panel mounting holes, 67 mounting spaces, Top channel style, Seismic Zone 4, network bay open duct rack, 11 gauge, ASTM A1011SS

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Material Details:
11 gauge, ASTM A1011SS
Mounting Rails:
12-24 panel mounting holes
Product Height:
140 in
Product Length Depth:
140 in
Product Weight:
137 lb
Product Width:
23 in
Special Features:
67 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, network bay open duct rack
Product Details:
Seismic Zone 4, network bay open duct rack
Product Style:
Top channel
Product Material:
Steel

B-LINE SB5777140TG – Frequently Asked Questions

1) Is the B-Line SB5777140TG rack rated for seismic installation in California?
It is built as a Seismic Zone 4 network bay open duct rack, which is the highest of the legacy seismic zone classifications and the one that covers most of coastal California. The frame is 11 gauge steel to ASTM A1011SS and the rack is UL Listed. Zone 4 rating applies to the rack itself, so your anchorage to slab and any overhead bracing still has to be engineered to the local code.
2) Should I use an open frame rack like this or a fully enclosed cabinet for a telecom room?
An open duct rack is the right call for cross-connect and network bay work: both sides of the panel stay accessible, cable is run into vertical duct rather than pulled through cabinet doors, and there is no door or side panel to remove. Go with an enclosed cabinet instead when you need physical security, dust control, or captive airflow for server gear. This B-Line frame is open, top channel style, with 67 mounting spaces on 12-24 rails.
3) What does top channel style mean on this rack and does it matter for my ladder rack?
Top channel means the rack is capped with a channel across the top of the two uprights, which is the surface you bolt ladder rack, runway, or overhead bracing to. On a 140 inch Zone 4 bay that top channel is also where the overhead sway bracing ties in, so lay out your cable runway with the channel height in mind.
4) Is the SB5777140TG a single rack or does it include cable management?
Model SB5777140TG is the open frame rack itself, 23 inches wide with 12-24 tapped rails and a top channel. Vertical cable duct, ladder rack, grounding busbar, and anchor hardware are separate items you specify to suit the room.
5) How much does this rack weigh and can one person handle it?
137 pounds bare, at 140 inches long. It is a two-person carry minimum, and realistically a three-person raise once it is on the anchors, because the length makes it awkward long before the weight does. Get it into the room lying down before you stand it up.
6) Will the Telco gray finish match the racks already in my MDF?
The finish is Telco gray powder coat, the standard grey used across telecom distribution frames, so it lines up with existing B-Line bays and most legacy telco racking in the room. Powder coat over 11 gauge steel, so it holds up to panel swaps and cable pulls better than a painted finish.
How fast can I get the B-LINE SB5777140TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5777140TG come with a warranty?
Absolutely. The B-LINE SB5777140TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5777140TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5777140TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!