B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$490.23
Image coming soon

B-Line Eaton series open racks, Steel, Telco gray powder coat finish, Double sided rack mounted shelf. Heavy duty, solid shelf, Shelves and #12-24 mo

(No reviews yet) Write a Review

Model: SB596V19106STG

In Stock (leaves warehouse same day if ordered before 3pm ET)

$490.23
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Steel, Telco gray powder coat finish, Double sided rack mounted shelf. Heavy duty, solid shelf, Shelves and #12-24 mounting hardware included

Manufacturer Resources

Product Specs

Certifications:
Not Applicable
Product Height:
6 in
Product Length Depth:
20 in
Product Weight:
13.3 lb
Product Width:
19.31 in
Department:
Electrical
Product Model:
Double sided rack mounted shelf, heavy duty, solid shelf
Product Finish:
Telco gray powder coat
Product Material:
Steel

B-LINE SB596V19106STG – Frequently Asked Questions

1) Will the B-Line SB596V19106STG shelf fit a standard 19 inch equipment rack?
Yes. The Eaton B-Line SB596V19106STG is a rack mounted shelf 19.31 inches wide, which is the standard 19 inch rack mounting width once the mounting flanges are counted. It goes into an open frame rack, not an enclosed cabinet with rails.
2) How much rack space does this B-Line double sided shelf take up?
The shelf is 6 inches high, which works out to roughly 3-1/2 rack units at the standard 1.75 inches per RU. Plan your vertical space around 6 inches of frame, plus whatever clearance the gear sitting on it needs.
3) Do I need to buy mounting hardware separately for this B-Line rack shelf?
No. The #12-24 mounting hardware ships with the shelf. If your rack is tapped 10-32 instead of 12-24, the included screws will not thread and you will need 10-32 hardware.
4) What does double sided mean on a rack mounted shelf, and do I need a two post or four post rack?
Double sided means the shelf attaches at both the front and rear rack uprights rather than cantilevering off the front pair only. That gives support across the full 20 inch depth, but it requires an open frame rack with both front and rear mounting channels. A two post relay rack with a single mounting plane will not take it.
5) Is this a vented shelf or a solid one? I'm setting equipment that runs warm on it.
It is a solid steel shelf, not vented. Air will not pass up through the deck, so for gear that draws cooling air from the bottom you want a vented shelf instead. Solid decks are the better pick for batteries, tools, transformers, test sets, and anything with feet that would drop into a vent slot.
6) Will a 19 inch deep switch or a UPS sit fully on this shelf?
The usable depth is 20 inches, so a chassis up to about 20 inches front to back sits fully supported. Deeper equipment will overhang the rear edge, which is where you should be looking at rails or a deeper shelf instead.
7) What is the exact part number to order for this Eaton B-Line heavy duty rack shelf?
Order Eaton B-Line part number SB596V19106STG. That number covers the double sided, heavy duty solid steel shelf, 19.31 inches wide by 20 inches deep by 6 inches high, in Telco gray powder coat.
8) Will this B-Line shelf match the gray finish on the rest of my open frame racks?
The finish is Telco gray powder coat, the same standard gray Eaton B-Line uses across its open frame rack line, so it reads consistent in a frame room already built out in Telco gray. Powder coat over steel also holds up to handling better than a painted finish in a working equipment room.
9) How heavy is the SB596V19106STG shelf itself, and is this a one person install?
The shelf weighs 13.3 lb on its own. One person can hold it in place and start the screws, though on a tall frame a second set of hands makes lining up the front and rear holes easier since it mounts at both planes.
How fast can I get the B-LINE SB596V19106STG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB596V19106STG come with a warranty?
Absolutely. The B-LINE SB596V19106STG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB596V19106STG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB596V19106STG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!