B-Line Eaton series open rack...
IN STOCK (leaves warehouse same day if ordered before 3pm ET)
$2,920.30
B-Line Eaton series open racks, Used to mount electronic switching equipment, Steel, Telco gray powder coat, 12-24 panel mounting holes, 38 mounting

B-Line Eaton series open racks, Used to mount electronic switching equipment, Steel, Telco gray powder coat, 12-24 panel mounting holes, 38 mounting

(No reviews yet) Write a Review

Model: SB5548096TG
Selected Model is

In Stock (leaves warehouse same day if ordered before 3pm ET)

$2,920.30
Adding to cart… The item has been added
Free Shipping on orders over $199
We price match and offer bulk discounts! Click Add to Quote. It's quick and easy.
✨
Earn points with this purchase! You can redeem points for giftcards, iPads, XBox's and more. View Rewards
Free Keying on all locks
You may also like
Eaton B-Line series open frame racks, Used to mount electronic switching equipment, Steel, Telco gray powder coat, 12-24 panel mounting holes, 38 mounting spaces, Top angle style, Seismic Zone 4, closed duct unequal flange rack

Manufacturer Resources

Product Specs

Certifications:
UL Listed
Mounting Rails:
12-24 panel mounting holes
Product Height:
96 in
Product Length Depth:
96 in
Product Weight:
93 lb
Product Width:
23 in
Special Features:
38 mounting spaces
Surface Finish:
Telco gray powder coat
Department:
Electrical
Product Group:
Racks & Frames
Product Subgroup:
Racks
Product Type:
Seismic Zone 4, closed duct unequal flange rack
Product Details:
Seismic Zone 4, closed duct unequal flange rack
Product Style:
Top angle
Product Material:
Steel

B-LINE SB5548096TG – Frequently Asked Questions

1) Will the B-Line SB5548096TG rack meet a Seismic Zone 4 requirement?
Yes. The Eaton B-Line SB5548096TG is built as a Seismic Zone 4, closed duct unequal flange rack, so it is the version to specify when the drawing calls for Zone 4 seismic anchorage. It is also UL Listed. Note that seismic performance depends on anchoring the base to the floor per the installation requirements, not on the frame alone.
2) How tall is this B-Line open frame rack and how many rack units does it hold?
The frame stands 96 inches tall and provides 38 mounting spaces for panel-mounted equipment. Check your ceiling height and any overhead cable runway or ladder rack before committing to a 96 inch upright.
3) What hole pattern do the mounting rails use, 12-24 or 10-32?
The rails on the SB5548096TG are punched with 12-24 panel mounting holes. If your switching gear, patch panels, or shelves are threaded or supplied for 10-32, the screws will not thread here, so order 12-24 hardware to match.
4) How much floor width do I need for this open frame relay rack?
The frame measures 23 inches wide, 96 inches high, and the length/depth figure is given as 96 inches. Plan aisle clearance on both sides since it is an open frame rack with no side panels, and equipment mounted on the rails will extend past the uprights.
5) Is an open frame rack the right choice, or should I use an enclosed cabinet?
An open frame rack like this one is what you want for telecom and electronic switching equipment that needs full access from both sides and open air around it, and where physical security is handled by the room rather than the rack. Go with an enclosed cabinet instead if you need lockable doors, dust control, or fan-forced airflow. This frame is a top angle style, which gives you a mounting surface at the top for cable runway or overhead ladder transition.
6) What is the exact part number to order for this B-Line Seismic Zone 4 rack?
Order Eaton B-Line model SB5548096TG. That number covers the 96 inch, 23 inch wide, 38 space Seismic Zone 4 closed duct unequal flange rack in Telco gray, with 12-24 rails. There is a single configuration under that model, so no finish or height suffix to add.
7) Will this rack hold up in a data room or central office where it gets handled constantly?
The frame is steel with a Telco gray powder coat finish, which is the standard look in central office and telecom rooms and will match existing B-Line gray racks in the same space. Shipping weight of the frame itself is 93 lb, so it is a two-person set and stand.
How fast can I get the B-LINE SB5548096TG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the continental U.S. Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit, reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB5548096TG come with a warranty?
Absolutely. The B-LINE SB5548096TG is backed by a manufacturer’s warranty. For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB5548096TG?
You can call, text, or email our expert support team for fast answers. We’re here to help with product selection, installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB5548096TG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support, and rewards on every order. Our team is always ready to help you choose the right product for your project.
!