B-Line Eaton series runway cable support bar, 14.21875" height, 14.21875" length, 15" width, Steel tubing, 13 gauge, Cable support bar, Telco gray pow

It is UL Classified. That is the rating carried on the SB16115TG support bar, and it is what most inspectors and telecom specs are looking for on runway support hardware.

Steel tubing at 13 gauge, finished in telco gray powder coat. The tubing section is why it carries load across the runway rather than flexing like a formed strap, and the powder coat is the standard telco gray so it matches existing B-Line runway and ladder rack in the room.

A support bar spans the runway to carry the cable bundle itself, listed application is support of a cable. Clamps and straps fasten a single cable or a small bundle to a member; the bar gives the bundle a bearing surface across the run so the weight is not sitting on the cable jacket or on the runway stringer. On vertical drops and transitions off the runway, that bar is what keeps the bend radius from collapsing.

Order Eaton B-Line SB16115TG. It is a single configuration, no finish or size options to specify, telco gray powder coat over 13 gauge steel tubing at 15 inch width.

Each bar weighs .64 lb, so overhead installation on a ladder is a one-man job. Plan on ordering enough bars to space along the run, and note that mounting hardware is not part of the bar itself, so confirm you have the fasteners your runway uses.