B-Line Eaton series runway shelf bracket, Used to secure cable runway to top angles of rack, Mounting plate,6" upright network equipment rack top plat

It's a runway shelf bracket kit that ties overhead cable runway down to the top angles of an equipment rack. The mounting plate sits on the rack's top and the runway is secured to it, so the rack carries the runway load instead of needing a separate wall or ceiling support at that point. Model SB213209FB is the 6 inch upright rack top plate version.

Either. The SB213209FB top plate accommodates runway in parallel or perpendicular orientation, so you can bring the runway down the row of racks or across the ends without a different bracket.

It's built for 6 inch rack uprights, mounting to the top angles of the rack. The plate measures 9.38 in wide, 7 in length/depth and 2.75 in high. If your racks use a different upright width, this is not the plate for that frame.

Attachment is through mounting holes, so it bolts to the existing top angles of the rack rather than welding or clamping. No drilling of the rack is part of the design.

Yes, the SB213209FB runway support kit is UL Listed.

A36 structural steel with a flat black powder coat, so it matches the standard flat black finish used on most cable runway and two-post racks. Shipping weight is 5.5 lb per kit.

Plan one kit per rack where the runway crosses or terminates over the frame. Each SB213209FB covers one 6 inch upright rack top, and since it takes runway parallel or perpendicular you can use the same part throughout a row instead of stocking two brackets.