You may also like
B-Line Eaton series runway splice, Heavy duty cable runway butt-splice clamp and kit, ASTM A570 structural steel, Yellow zinc finish
Model: BLN-SB168CYZ
Eaton B-Line series runway splice, Heavy duty cable runway butt-splice clamp and kit, ASTM A570 structural steel, Yellow zinc finish
B-LINE
$76.41
$30.54
B-Line Eaton series runway splice, Heavy duty cable runway butt-splice clamp and 2" kit, ASTM A570 structural steel, Yellow zinc
Model: BLN-SB168D2YZ
Eaton B-Line series runway splice, Heavy duty cable runway butt-splice clamp and 2" kit, ASTM A570 structural steel, Yellow zinc
B-LINE
$107.50
$67.85
B-Line Eaton series runway splice, Heavy duty cable runway butt-splice clamp and kit, ASTM A570 structural steel, Finish yellow zinc
Model: BLN-SB168C2YZ
Eaton B-Line series runway splice, Heavy duty cable runway butt-splice clamp and kit, ASTM A570 structural steel, Finish yellow zinc
B-LINE
$84.34
$40.71
B-Line Eaton series runway splice, Used to connect runway stringers, Cable runway butt-splice clamp and kit, ASTM A570 structural steel, Yellow zinc
Model: BLN-SB2107YZ
Eaton B-Line series runway splice, Used to connect runway stringers, Cable runway butt-splice clamp and kit, ASTM A570 structural steel, Yellow zinc
B-LINE
$89.24
$45.80
Eaton B-Line series runway splice, Heavy duty cable runway butt-splice clamp and kit, ASTM A570 structural steel, Yellow zinc
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Material Details:
- Yellow zinc ASTM A570 steel
- Product Height:
- 1.5 in
- Product Length Depth:
- 4 in
- Product Weight:
- .54 lb
- Product Width:
- .766 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Clamps
- Product Type:
- Heavy duty cable runway butt-splice clamp & kit
- Product Details:
- Heavy duty cable runway butt-splice clamp & kit
- Product Length:
- 4 in
B-LINE SB168DYZ – Frequently Asked Questions
1) What does the B-Line SB168DYZ butt-splice clamp kit do in a cable runway installation?
The SB168DYZ is a heavy duty butt-splice clamp and kit used where two lengths of cable runway meet end to end. It clamps the two stringer ends together so the run continues as one straight path instead of stopping at the end of a section. It is sold as a kit, so the clamp and its hardware come together under one part number.
2) Is the SB168DYZ runway splice clamp UL Listed?
Yes, the B-Line SB168DYZ splice clamp is UL Listed. That matters for data center and telecom rooms where the inspector wants listed support components on the runway, not shop-made plate and bolt.
3) What is the B-Line SB168DYZ splice clamp made of, and will the yellow zinc finish hold up indoors?
It is ASTM A570 structural steel with a yellow zinc plating. ASTM A570 is a hot-rolled carbon steel sheet and strip grade, which is why the part can be called heavy duty rather than a light stamped bracket. Yellow zinc is a plated finish intended for dry interior use, the normal environment for cable runway in a telecom or equipment room. For exterior or wet locations, specify a hot-dip galvanized or stainless support instead.
4) What size is the B-Line SB168DYZ splice clamp and how much does it weigh?
The clamp measures 4 in by 1.5 in by .766 in and weighs .54 lb. That footprint is worth checking against your stringer before you order a case of them, since the clamp has to sit flat on the runway side rail at the joint without fouling a threaded rod hanger or a ladder rung. At just over half a pound each, a box of splices adds meaningful weight to a large overhead order.
5) Do I need a butt splice or a junction kit where my cable runway sections meet?
Use a butt splice like the SB168DYZ where two runs meet end to end in a straight line and you want the joint to behave as continuous runway. Where runs meet at a corner, a tee, or at different elevations, a butt splice is the wrong part, you need the corresponding junction or elevation kit for that geometry. Ordering splices for a layout full of turns is the most common way a runway order comes up short.
6) How do I order the correct B-Line runway splice part number?
Order by manufacturer part number SB168DYZ from Eaton B-Line. The DYZ suffix carries the yellow zinc plated finish, so if a project spec calls for a different finish on the runway system, the base splice number stays but the finish code changes. Quote SB168DYZ when you are matching existing yellow zinc runway hardware already in the room.
How fast can I get the B-LINE SB168DYZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB168DYZ come with a warranty?
Absolutely. The B-LINE SB168DYZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB168DYZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB168DYZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.