You may also like
B-Line Eaton series runway splice, Used to connect runway stringers into straight run, Used with and series and hardware, Runway horizontal reducing
Model: BLN-SB2102A2YZ
Eaton B-Line series runway splice, Used to connect runway stringers into straight run, Used with (SB165A) and (SB166A) series and hardware, Runway horizontal reducing butt splice kit, ASTM A570...
B-LINE
$119.61
$83.11
B-Line SB2102AYZ Eaton series runway splice, Used to connect runway stringers into straight run, Used with (SB165A) and (SB166A) series and hardware, Runway horizontal reducing butt splice kit, ASTM A570 structural steel, Yellow zinc
Model: BLN-SB2102AYZ
Eaton B-Line series runway splice, Used to connect runway stringers into straight run, Used with (SB165A) and (SB166A) series and hardware, Runway horizontal reducing butt splice kit, ASTM A570...
B-LINE
$113.04
$74.64
B-Line Eaton series runway splice, Used to connect stringers at 90° horizontal tee, Runway 90? junction splice clamp and kit, Yellow zinc
Model: BLN-SB2101A2YZ
Eaton B-Line series runway splice, Used to connect stringers at 90° horizontal tee, Runway 90? junction splice clamp and kit, Yellow zinc
B-LINE
$93.61
$52.59
B-Line SB2102BYZ Eaton series runway splice, Used to connect stringers into straight run, Used with (SB165A) and (SB166A) series and hardware, Runway horizontal reducing and 90° junction butt splice kit, ASTM A570 structural steel, Yellow zinc finish
Model: BLN-SB2102BYZ
Eaton B-Line series runway splice, Used to connect stringers into straight run, Used with (SB165A) and (SB166A) series and hardware, Runway horizontal reducing and 90° junction butt splice kit, ASTM...
B-LINE
$129.19
$93.30
B-Line Eaton series runway splice, Used to connect runway stringers 0° to 90° angle, Runway mitering reended, Runway adjustable junction splice clamp,
Model: BLN-SB167YZ
Eaton B-Line series runway splice, Used to connect runway stringers 0° to 90° angle, Runway mitering recommended, Runway adjustable junction splice clamp, ASTM A570 structural steel, Yellow zinc
B-LINE
$104.24
$64.46
Eaton B-Line series runway splice, Used to connect stringers into straight run, Used with (SB165A) and (SB166A) series and hardware, Runway horizontal reducing and 90° junction butt splice kit, ASTM A570 structural steel, Yellow zinc
Manufacturer Resources
Product Specs
- Application:
- Used to connect stringers into straight run
- Certifications:
- UL Listed
- Material Details:
- Yellow zinc ASTM A570 steel
- Product Height:
- 2 in
- Product Length Depth:
- 5 in
- Product Weight:
- 1.44 lb
- Product Width:
- 2.1875 in
- Special Features:
- Used with (SB165A) & (SB166A) series and hardware
- Department:
- Electrical
- Product Group:
- Connectors & Adapters
- Product Subgroup:
- Splice Components
- Product Type:
- Runway horizontal reducing and 90° junction butt splice kit
- Product Details:
- Runway horizontal reducing and 90° junction butt splice kit
B-LINE SB2102B2YZ – Frequently Asked Questions
1) What does the Eaton B-Line SB2102B2YZ runway splice kit actually do?
It is a butt splice kit for joining cable runway stringers. The SB2102B2YZ handles horizontal reducing runs and 90 degree junctions, so you can splice a wider runway section to a narrower one in a straight run, or turn a corner, without fabricating anything on site.
2) Which B-Line cable runway series does the SB2102B2YZ splice kit work with?
The kit is made for the SB165A and SB166A series runway and their hardware. If your stringers are from another runway family, check the stringer series before ordering this splice.
3) Can I use this splice to step a wide runway down to a narrower one?
That is exactly what the reducing function is for. The SB2102B2YZ is a horizontal reducing butt splice, so it joins runway sections of differing width end to end in the same horizontal plane. It also serves as a 90 degree junction splice where one runway tees or turns into another.
4) Do I need to order mounting hardware separately for the SB2102B2YZ splice?
It ships as a kit, and it is specified for use with the SB165A and SB166A series runway and hardware. Order the splice by part number SB2102B2YZ; the runway stringers and any threaded rod, ceiling brackets or wall angles for supporting the run are separate items.
5) Will the B-Line runway splice kit hold up in a humid or unconditioned equipment room?
The splice is ASTM A570 structural steel with a yellow zinc finish, which gives it corrosion resistance for indoor equipment rooms and similar unconditioned interior spaces. The yellow zinc will not color-match black or gray painted runway, so expect a visual difference at the joint.
6) What size is the B-Line SB2102B2YZ splice kit, and how much does it weigh?
The kit measures 5 x 2.1875 x 2 inches and weighs 1.44 lb. Useful when you are counting splice hardware weight into a threaded rod or ceiling support load for a long runway run.
How fast can I get the B-LINE SB2102B2YZ delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB2102B2YZ come with a warranty?
Absolutely. The B-LINE SB2102B2YZ is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB2102B2YZ?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB2102B2YZ from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.