You may also like
Eaton B-Line series runway support, Telco gray, Aluminum, Runway center support hange kit
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Product Height:
- 12 in
- Product Length Depth:
- 1 in
- Product Weight:
- 2.7 lb
- Product Width:
- 5 in
- Special Features:
- Telco gray
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Runway center support hange kit
- Product Details:
- Runway center support hange kit
- Product Material:
- Steel
B-LINE SB212705ATG – Frequently Asked Questions
1) What is the Eaton B-Line SB212705ATG runway center support hanger kit used for?
It is a center support hanger kit for cable runway, the overhead ladder rack used in telecom rooms and data centers. It hangs the runway at a mid-span point between wall or rack attachments so long runs do not sag. Eaton part number SB212705ATG, finished in Telco gray.
2) Is the B-Line SB212705ATG runway support UL Listed?
Yes, the SB212705ATG center support hanger kit is UL Listed. That matters if your inspector or facility spec requires listed support hardware on grounded cable runway in a telecom or data room.
3) How much room do I need above the runway for this B-Line center support hanger?
Plan for roughly a foot of vertical space. The SB212705ATG kit measures 12 inches in height, 5 inches in width, and 1 inch in length/depth, so it needs about 12 inches of clearance between the runway and your threaded rod or structural attachment point.
4) Is the B-Line SB212705ATG center support kit aluminum or steel?
The material is listed as steel, finished in Telco gray to match standard B-Line runway. If your specification calls strictly for aluminum support hardware throughout, confirm the material line against your submittal before ordering.
5) Will the Telco gray finish match the B-Line cable runway already installed in my telecom room?
Telco gray is the standard finish used across B-Line cable runway and its support hardware, so the SB212705ATG kit matches existing gray B-Line ladder rack in a retrofit or an added run.
6) Do I order one SB212705ATG per runway section or only where the span is long?
It is a center support, meaning it is used at intermediate points between the end attachments rather than on every joint. Count the mid-span locations on your runway layout and order one kit for each. Straight wall-mounted sections with supports at both ends may need none.
7) How heavy is the B-Line SB212705ATG hanger kit for figuring anchor loads?
The kit itself weighs 2.7 lb, so its own dead load is negligible next to the cable bundle. Size your overhead anchors and threaded rod for the runway plus the cable fill, not for the hanger.
How fast can I get the B-LINE SB212705ATG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB212705ATG come with a warranty?
Absolutely. The B-LINE SB212705ATG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB212705ATG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB212705ATG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.