B-Line Eaton series runway support, Used to support cable runway from objects, 10" runway support, ASTM A36 structural steel, Yellow zinc

The SB2262410YZ is a steel support bracket that hangs or braces cable runway off an adjacent object such as a wall, column, or other structure, rather than off threaded rod alone. It is a 10 inch support, with a 24 inch width and 27.75 inch overall length/depth, and weighs 3.8 lb. Typical use is in data rooms and telecom closets where ladder-style cable runway has to be carried along a building surface.

Structural steel to ASTM A36, finished in yellow zinc. Yellow zinc is a plated finish intended for dry indoor use, so it suits equipment rooms and telecom closets. For wet, corrosive, or exterior locations you want a hot dip galvanized or stainless support instead.

Yes, the SB2262410YZ carries a UL Listed certification, which is what most inspectors and institutional specs want to see on cable support hardware in an electrical or telecom room.

The 10 inch figure is the support's height, which is the standoff dimension between the mounting surface and the runway it carries. That 10 inches is what gives you room to route and dress cable behind the runway, so check your wall clearance before ordering, along with the 27.75 inch overall length/depth.

Order the SB2262410YZ as the steel support bracket itself, model SB2262410YZ. Anchors and fasteners for attaching it to concrete, block, or steel are selected to the substrate on your job, so plan those separately along with the hardware that fastens the runway stringer to the support.