B-Line Eaton series runway support, Used to support cable runway from objects, Includes 5⁄16 J bolts and nuts., 2" runway support, ASTM A36 structural

Yes, it is built as a 2 inch runway support, matching 2 inch deep runway stringer. If your runway uses a different stringer depth, you need the support sized to that depth instead.

UL Listed, yes. Combined with the Telco gray powder coat finish it is the standard look and listing for telecom and data room runway, so it will match existing gray runway in a central office or MDF.

It measures 2 in height, 6 in width and 9.75 in length/depth, and weighs 1.1 lb. That 9.75 inch dimension is what you need to clear when planning offset from the supporting object.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the common structural carbon steel grade, so it is strong but not corrosion resistant on its own. The powder coat is the corrosion barrier, which suits indoor and conditioned equipment rooms. For wet or corrosive exposure, specify a hot dip galvanized or stainless support instead.

A runway support like the SB2260602TG is for picking the runway up off an existing object such as a wall, column, rack or equipment frame, and it comes with J bolts to hook that member. A threaded rod trapeze is what you use when the runway is suspended in open span from deck with nothing nearby to grab. If you have structure adjacent to the run, the bracket support is fewer parts and less overhead work.

It is finished in Telco gray powder coat, the same gray specified on standard telecom cable runway, so the support blends with existing runway rather than standing out as a mismatched bracket.