B-Line Eaton series runway support, Used to support cable runway from objects, Includes 5?16 J bolts and nuts anchors not included, Runway support, AS

The SB2262406FB ships with 5/16 J bolts and nuts for attaching the cable runway. Anchors are not included, so you supply the concrete anchors, threaded rod, beam clamps or whatever the overhead structure calls for. Budget that into the job before the crew is on site.

The support measures 27.75 x 24 x 6 inches, so the 24 inch dimension is what governs the runway width it spans. Check it against the runway you are hanging before ordering, since a wider tray needs a wider support.

Yes, the B-Line runway support is UL Listed. That is the line most facility and institutional specs want to see for overhead cable runway support in a telecom or equipment room.

ASTM A36 structural steel with a flat black powder coat. A36 is the standard structural carbon steel used for load-carrying supports, and the black powder coat matches typical black runway and ladder rack so an exposed overhead run looks consistent. It is a painted steel finish, so it suits conditioned indoor spaces rather than wet or corrosive environments.

It supports cable runway off surrounding objects and structure, rather than sitting on the floor. In practice that means hanging or bracing an overhead runway from walls, racks, or building steel in a telecom or equipment room.

3.2 lb per piece. Light enough for a single installer to hold in place while starting the anchors, which matters when you are setting a row of them on a ladder.

One configuration: model SB2262406FB, the flat black powder coated version. There is no finish or size choice to specify, so ordering is just quantity plus your own anchors.