You may also like
B-Line Eaton series runway wall angle support kit, Mounting plate, Runway wall angle support kit, ASTM A36 structural steel, Flat black powder coat fi
Model: BLN-SB211318FB
Eaton B-Line series runway wall angle support kit, Mounting plate, Runway wall angle support kit, ASTM A36 structural steel, Flat black powder coat finish
B-LINE
$164.74
$155.87
B-Line Eaton series runway to rack support kit, Mounting plate, Runway wall angle support kit, ASTM A36 structural steel, Flat black powder coat
Model: BLN-SB213309FB
Eaton B-Line series runway to rack support kit, Mounting plate, Runway wall angle support kit, ASTM A36 structural steel, Flat black powder coat
B-LINE
$170.59
$163.66
Eaton B-Line series runway wall angle support kit, Mounting plate, Runway wall angle support kit, Structural steel, Flat black powder coat
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Material Details:
- Flat black powder coat ASTM A36 steel
- Mounting Method:
- Mounting hole
- Product Height:
- 1.63 in
- Product Length Depth:
- 1.63 in
- Product Weight:
- 4.3 lb
- Product Width:
- 13.13 in
- Department:
- Electrical
- Product Group:
- Clamps & Supports
- Product Subgroup:
- Supports
- Product Type:
- Runway wall angle support kit
- Product Details:
- Runway wall angle support kit
- Product Length:
- 1.63 in
B-LINE SB211312FB – Frequently Asked Questions
1) What is the B-Line SB211312FB runway wall angle support kit used for?
It is a wall angle support kit for cable runway, model SB211312FB from the Eaton B-Line series. The kit is a mounting plate assembly that carries runway off a wall rather than from overhead threaded rod or floor-standing racks, so you use it where runway terminates at or runs along a wall in a data room or equipment room. It attaches through mounting holes.
2) Is the B-Line SB211312FB wall angle support UL Listed for a data center install?
Yes, the SB211312FB wall angle support kit is UL Listed. That matters when the runway is being bonded as part of the telecom grounding system and the inspector wants listed support hardware on the line.
3) How wide is the B-Line SB211312FB wall angle support and will it fit behind a narrow rack?
The SB211312FB measures 13.13 inches on its width dimension, with the other two dimensions at 1.63 inches each. So it is a long, slim angle bracket, not a bulky casting, and the 1.63 inch profile is what determines how far it stands off the wall or how much depth it takes up. Lay your runway width against the 13.13 inch figure to confirm the bracket spans it.
4) What steel and finish is the B-Line wall angle runway support made from?
ASTM A36 structural steel with a flat black powder coat. A36 is the standard structural carbon steel grade, so this is a load-carrying bracket rather than formed sheet, and the flat black finish matches the usual black cable runway and rack hardware in a comms room. Powder coat is for indoor, dry equipment-room conditions.
5) Do wall anchors or fasteners come with the B-Line SB211312FB support kit?
The SB211312FB is supplied as a wall angle support kit that mounts through mounting holes. Wall anchors are substrate-specific, so plan on specifying your own concrete anchors, toggles, or lags to suit the wall you are fastening to, and the hardware that ties the runway itself to the bracket per your runway system.
6) Should I use a wall angle support or a threaded rod drop for my cable runway?
Use a wall angle support like the B-Line SB211312FB where the runway meets or runs along a solid wall and you can get a good anchor into it. It is the simpler, lower-profile option and it keeps the ceiling clear. Threaded rod drops are the alternative when the runway crosses open floor space away from any wall, or when the wall is not structurally sound enough to carry the cable load. Floor-standing supports are the choice in a slab-only room with no suitable wall or deck.
7) Is the B-Line SB211312FB suitable for outdoor or damp locations?
The finish is a flat black powder coat over A36 carbon steel, which is an indoor, dry-location finish. For a wet, corrosive, or exterior run you want hot dip galvanized or stainless support hardware instead. Keep this bracket in the equipment room, MDF, or IDF.
How fast can I get the B-LINE SB211312FB delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SB211312FB come with a warranty?
Absolutely. The B-LINE SB211312FB is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SB211312FB?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SB211312FB from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.