B-Line Eaton series runway wall angle support kit, Used to secure cable runway to a wall, Order anchors separately, 6" runway wall angle support kit,

No. Anchors are ordered separately on the SB211309TG kit. Pick the anchor to suit your wall substrate (concrete, block, or a stud framed wall) and the load on the run, because the kit itself only supplies the wall angle bracket hardware for attaching the runway.

It is the 6 inch runway wall angle support kit, so it is sized to a 6 inch wide cable runway. The bracket measures 10.13 inches across with a 1.63 inch height and 1.63 inch depth, which gives you the wall footprint to check against surrounding conduit or equipment before you set the anchors.

It is ASTM A569 steel with a Telco gray powder coat, the standard runway color in telecom and data rooms, so it matches typical B-Line cable runway and ladder rack already installed. The 6 gauge steel is the same heavy material class used in the runway sections themselves.

Use the wall angle when the runway terminates at or runs along a wall, such as entering a rack lineup or crossing a room perimeter. It transfers the load into the wall through anchors you supply. Threaded rod drops or center support kits are the right choice for runway suspended in open ceiling space away from any wall. Many rooms use both: wall angles at the terminations, drops through the middle of the run.

2.6 lb per kit. Light enough for a one-man install on a ladder, but the weight tells you it is a solid formed steel bracket rather than a sheet stamping, so specify an anchor rated for the bracket plus the loaded runway it carries.