B-Line Eaton series single sided distribution , 108" height, 94" length, 9.25" width, 10 vertical with 10 shelves, ASTM A36 structural steel, Telco gr

It weighs 388.141 lb as shipped. That load sits on a footprint only 9.25 inches wide, so it concentrates on a narrow line along the floor. On a raised access floor, confirm the panel and pedestal rating before setting it; on slab it is a non-issue. Plan on more than one person or equipment to stand a 108 inch frame upright.

Single sided means terminations mount on one face only, so the frame can be set against a wall and worked from the front. This one supports terminal blocks for central cross connects. If you need to terminate from both faces and run cross connects between them in an aisle, you want a double sided frame instead, which needs clearance on both sides of the run.

It is configured with 10 verticals and 10 shelves. That is the full bay as ordered, so you are not buying verticals and shelves separately to build it out. Terminal blocks, mounting hardware for your blocks, and any cable management beyond the frame itself are separate.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the common structural carbon steel grade, and the powder coat is the standard telecom gray so the bay matches existing frame lineups in a central office or MDF room.

Certifications are marked Not Applicable for this frame. It is passive steel support structure for terminal blocks and cross connects, not an energized or listed electrical device, so no UL or similar listing applies to the frame itself. Your terminations and any powered equipment mounted on it carry their own listings.