B-Line Eaton series single sided distribution , 120" height, 100" length, 9.25" width, 7 vertical with 13 shelves, ASTM A36 structural steel, Telco gr

The frame is built with 7 vertical uprights carrying 13 horizontal shelves across the 100 inch length. The shelves are where terminal blocks land; the verticals carry the vertical cross connect wiring between shelf levels. That count is fixed for the SB60912007TG build, so if you need a different shelf count or a double sided frame you need a different frame model.

Single sided, like the SB60912007TG, mounts flat against a wall and is worked from the front only. That is the right choice when the room is narrow, when only one wall is available, or when the block count fits 13 shelves on one face. Go double sided when you need roughly twice the block density in the same floor run and you have the aisle space to work both faces. With a 9.25 inch width, this single sided frame gives up very little floor depth to the wall.

Order Eaton B-Line part number SB60912007TG. That single catalog number covers the whole configuration: single sided, 120 inch height, 100 inch length, 9.25 inch width, 7 verticals and 13 shelves. There are no finish or size options to select against it, so the part number alone fully specifies the frame.

What you are buying is the frame: uprights, shelves, and the A36 steel structure in Telco gray. Terminal blocks, block mounting hardware, cross connect wire, vertical wire rings, and floor anchors are separate items on a distribution frame build, so budget them alongside the frame for a complete cross connect job.

Steel construction, specifically ASTM A36 structural steel, with a Telco gray powder coat finish. A36 is the standard hot-rolled structural grade, so the uprights behave like structural members rather than formed sheet, which is what lets a 120 inch frame carry a loaded cross connect field. The Telco gray powder coat is the industry-standard color, so it will match existing frames and relay racks in most central office and riser rooms.