B-Line Eaton series single sided distribution , 138" height, 123" length, 9.25" width, 6 vertical with 16 shelves, ASTM A36 structural steel, Telco gr

No. This one mounts blocks on one face only, so it belongs against a wall or at the end of a room where you work it from the front. If your layout puts the frame in the middle of a floor with cross connects terminating from both directions, you want a double sided distribution frame instead, not this configuration.

It's the backbone rack for central cross connects. The SB60913806TG carries terminal blocks for cross connect work, with 6 verticals and 16 shelves to lay out block fields in an organized grid. Single sided means blocks mount on one face only, so it can be set against a wall rather than needing access from both sides the way a double sided frame does.

293.016 lb shipping weight on the frame itself, before any terminal blocks or cable. That is a two-person or mechanical-lift set at minimum, and at 138 inches tall it needs to be braced and anchored as you stand it. Check your floor loading before committing to a row of them, since the weight adds up fast frame to frame.

The SB60913806TG is configured with 6 verticals and 16 shelves across its 123 inch length. That's the full shelf complement as built, so you're laying out block capacity against those 16 positions when you plan the cross connect field.

Order it as Eaton B-Line SB60913806TG. That number pins the whole configuration: single sided, 138 inch height, 123 inch length, 9.25 inch width, 6 vertical with 16 shelves. If a submittal calls for a different shelf count or a double sided build, it is a different part number in the series.

ASTM A36 structural steel, finished in Telco gray powder coat. A36 is the common hot-rolled structural grade, which is why these frames can carry a full field of blocks over a 138 inch height without racking. The gray powder coat is the standard telecom equipment room color, so it matches existing frame lineups in most central office and MDF rooms.