B-Line Eaton series single sided distribution , 84" height, 64" length, 9.25" width, 9 vertical with 8 shelves, ASTM A36 structural steel, Telco gray

The SB60908409TG single sided distribution frame measures 84 inches high, 64 inches long, and 9.25 inches wide. The narrow 9.25 inch footprint is what lets it sit against a wall in a telecom or cross connect room, while the 64 inch length carries the 9 vertical bays. Check your ceiling height and door clearance against the 84 inch height before it arrives on site.

Nine verticals with eight shelves between them, single sided. That gives eight usable mounting levels across the 64 inch length for terminal blocks, and because it is single sided all of the termination work happens on one face.

It is a universal distribution frame built to support terminal blocks for central cross connects, the backbone of a telephone or low voltage cross connect room where incoming cable is terminated and jumpered to building distribution. It is not a server rack and carries no EIA rack mounting rails.

Single sided. All nine verticals face one direction, so it mounts against a wall and you work from the front only. If you need terminations on both faces for a back to back cross connect layout, a single sided frame is the wrong choice and you want a double sided universal distribution frame instead.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the common hot rolled structural grade, so the frame is welded and bolted steel rather than formed sheet, and the gray powder coat matches the standard finish used through most central office and telecom equipment rooms.

Order Eaton B-Line part number SB60908409TG. That number covers the 84 inch high, 64 inch long, 9.25 inch wide single sided frame with 9 verticals and 8 shelves in Telco gray.