B-Line Eaton series slotted angle, 1.6" height, 144" length, 1.6" width, Steel channels, Green, Dura green, 300 lbs, 14 gauge, Channel, strut and fitt

Yes, the SA158GRN144 is UL Listed, which is what inspectors and institutional specs look for when the angle is being used to support conduit, boxes, and raceway. It is an electrical channel and strut product, not a general shelving bracket.

The finish is Dura Green, B-Line's green painted coating, over 14 gauge steel. It is a painted finish, so it suits dry interior and normally damp indoor service. For exterior, wash-down, or chemically aggressive environments, specify a hot-dip galvanized or stainless slotted angle instead of the painted green version.

Slotted angle like this 1.6 x 1.6 inch L-section is the choice when you want to bolt directly through slots, build brackets, frames, and gussets, and cut to length on site with no special fittings. Strut channel is the better pick when you need to slide spring nuts along the run and change positions later, or when you are clamping pipe with standard strut clamps. For fixed bracketry and bolted connections, the angle is simpler and lighter at 14 gauge.

The SA158GRN144 ships as the 144 inch slotted angle length only. Bolts, nuts, washers, corner gussets, and any beam clamps or anchors you need to attach it to structure are separate line items. Plan those into the order so the crew is not short on install day.

Order Eaton B-Line part number SA158GRN144. That number breaks down as the SA158 slotted angle profile, GRN for the Dura Green finish, and 144 for the 144 inch length. There is one configuration under it, so there is no finish or length option to pick.

Yes. 14 gauge steel angle cuts cleanly with a bandsaw, chop saw with a metal blade, or portable band saw, and the slot pattern runs the full 144 inches so a cut piece still has usable holes. Touch up cut ends with a matching green paint to keep the exposed steel protected.