You may also like
B-Line Eaton series spot insert, Used with curtain wall applications , Plain finish, 2500 lbs load cap, Steel, Heavy duty spot insert
Model: BLN-B2505PLN
Eaton B-Line series spot insert, Used with curtain wall applications , Plain finish, 2500 lbs load cap, Steel, Heavy duty spot insert
B-LINE
$4,929.34
Eaton B-Line series spot insert, Used with curtain wall applications , Plain finish, 2500 lbs, Steel, Heavy duty spot insert
Manufacturer Resources
Product Specs
- Application:
- Used with curtain wall applications
- Certifications:
- UL Listed
- Load Capacity:
- 2500 lbs
- Product Height:
- 5.5 in
- Product Length Depth:
- 12 in
- Product Weight:
- .42 lb
- Product Width:
- 1.625 in
- Department:
- Electrical
- Product Group:
- Accessories
- Product Subgroup:
- Inserts
- Product Type:
- Heavy duty spot insert
- Product Finish:
- Plain
- Product Details:
- Heavy duty spot insert
- Product Material:
- Steel
B-LINE B2503PLN – Frequently Asked Questions
1) What size is the B-Line B2503PLN insert, and will it fit between my rebar?
The B2503PLN measures 12 in length/depth, 5.5 in height and 1.625 in width. The 12 inch run is the dimension to watch when you are laying it out between reinforcing, and the 1-5/8 inch width keeps it slim enough to sit in a normal deck pour. Shipping weight on the insert is .42 lb.
2) Can I install a spot insert after the concrete has already been poured?
No. A spot insert is a cast-in-place component, set in the formwork before the pour so the concrete locks around it. If your slab is already cured, the B2503PLN is the wrong part and you need a post-installed anchor or a channel system rated for your load instead.
3) What is a spot insert used for on a curtain wall job?
A spot insert is cast into the concrete slab edge or deck before the pour to give you a single fixed anchor point you can hang from later. The Eaton B-Line B2503PLN is specified for curtain wall applications, where the insert is placed ahead of the pour so the wall anchors and brackets bolt to embedded steel rather than to post-installed anchors drilled into cured concrete.
4) Does the plain finish B-Line insert need coating for exterior or damp concrete?
Plain finish means bare steel with no protective coating applied. Cast into the concrete it is protected by the pour, but any exposed face or the threaded connection can corrode in wet or exterior conditions. If you need corrosion protection on the exposed portion, plan on a field-applied coating or specify a galvanized insert instead.
How fast can I get the B-LINE B2503PLN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B2503PLN come with a warranty?
Absolutely. The B-LINE B2503PLN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B2503PLN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B2503PLN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.