B-Line Eaton series strut channel, 1.62" channel height, 240" channel length, 1.62" channel width, Steel, 14 Gauge, B24 channel type, DURA GREEN

No. The B24 is supplied as bare 240 inch channel only. Strut nuts, spring nuts, end caps, post bases, fittings and threaded rod all have to be ordered separately, sized for the 1-5/8 inch profile.

B24 is the back-to-back (two channels welded lip to lip) configuration in the B-Line series, formed from 14 gauge steel. It gives you a closed square section with a slot on two opposing faces, which is what you want for trapeze hangers and free-standing supports where a single channel would twist.

DURA GREEN is a green painted coating over the steel channel. It is a coated finish rather than bare steel, so it suits dry interior runs and typical indoor electrical and mechanical support work. For sustained wet, washdown or corrosive service, specify a hot dip galvanized or stainless channel instead.

A single channel is one formed section with one slotted face. B24 joins two of them into a closed 1.62 x 1.62 inch tube with slots on opposite sides, in 14 gauge steel. Use B24 where you need to load or attach from two directions, or where span and stiffness are the deciding factor. For a straight wall-mounted run with fittings on one side only, a single channel does the job with less weight.

Order Eaton B-Line B24-240 GRN. The number reads as B24 channel type, 240 inch length, GRN for the DURA GREEN finish. There is one configuration, so no finish or length options to specify beyond that.

Yes, it is 14 gauge steel channel and cuts with a bandsaw, chop saw with a metal blade or portaband. The 240 inch stick is meant to be cut down on the job. Touch up cut ends with a matching green or zinc-rich paint, since cutting exposes bare steel through the DURA GREEN coating.