Eaton B-Line series strut channel, nuts, all threaded rod, Steel, 3/4" stud nut with spring, Electro-plated zinc, 3/8"-16 thread size
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 3/8”-16
- Certifications:
- Not Applicable
- Product Height:
- .85 in
- Product Length Depth:
- 1 in
- Product Weight:
- .08 lb
- Product Width:
- 1.31 in
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Stud nut with spring
- Product Finish:
- Electro-plated
- Product Details:
- Stud nut with spring
- Product Material:
- Steel
B-LINE SN224-1ZN – Frequently Asked Questions
1) What thread size does the B-Line SN224-1ZN stud nut take?
The SN224-1ZN stud nut is tapped 3/8"-16, so it mates with 3/8"-16 threaded rod or 3/8" bolts. If your rod is 1/2"-13 or 1/4"-20, this is the wrong nut.
2) What does the spring on this B-Line strut nut actually do during install?
The spring holds the nut in position inside the strut channel while you line up the rod or bolt, so it doesn't drop down the run. You compress it, slide the nut into the channel slot, turn it a quarter turn so the grooved ends bite the channel lips, and the spring pushes it back up against them. That's what lets one person hang trapeze and rod supports overhead without a second set of hands.
3) What size is the B-Line SN224 stud nut and will it fit standard 1-5/8" strut channel?
The nut measures 1.31 in wide, 1 in long, and .85 in high, and weighs .08 lb. The 1.31 in width is the dimension that matters, it's sized to turn into the slot of standard 1-5/8" channel and seat under the return lips.
4) Is the SN224-1ZN strut nut OK for outdoor or damp locations?
It's steel with an electro-plated zinc finish, which is a standard indoor, dry-location plating. For exterior, wet, or corrosive environments, step up to a hot dip galvanized or stainless strut nut instead.
5) I'm hanging conduit on all-thread from strut, which nut do I order?
For 3/8" all-threaded rod running into strut channel, the B-Line SN224-1ZN is the piece that goes in the channel. It's a 3/4" stud nut with spring in 3/8"-16, steel with zinc plating. You supply the rod and whatever clamp or hanger sits at the conduit end.
6) Does the B-Line SN224-1ZN come with the bolt or rod?
No. What you get is the spring nut itself. The threaded rod, bolt, washers, and any hanger hardware are ordered separately.
How fast can I get the B-LINE SN224-1ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE SN224-1ZN come with a warranty?
Absolutely. The B-LINE SN224-1ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE SN224-1ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE SN224-1ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.