Eaton B-Line series strut channel, nuts, all threaded rod, Steel, Channel nuts, Nut without spring, Stainless steel type 316, 1100 lbs pull out strength, 800 lbs slip strength, 3/8"-16 thread size
Manufacturer Resources
Product Specs
- Bolt Thread Rod Size:
- 3/8”-16
- Certifications:
- Not Applicable
- Load Rating Pull Out Strength:
- 1100 lbs
- Load Rating Slip Strength:
- 800 lbs
- Product Category:
- Channel nuts
- Product Height:
- .85 in
- Product Length Depth:
- 1.75 in
- Product Weight:
- .09 lb
- Product Width:
- 1.375 in
- Department:
- Electrical
- Product Group:
- Fasteners
- Product Subgroup:
- Washers / Nuts / Bolts / Screws
- Product Type:
- Nut without spring
- Product Finish:
- Stainless steel type 316
- Product Details:
- Nut without spring
- Product Material:
- Steel
B-LINE N228WOSS6 – Frequently Asked Questions
1) Is this channel nut suitable for outdoor or wet corrosive locations?
Yes. It is Type 316 stainless steel, which is the grade specified for coastal, wastewater, food processing, and chemical exposure where plated or Type 304 hardware would pit. That makes it the right choice for exterior rooftop strut runs and washdown areas.
2) Does this B-Line channel nut come with a spring?
No, it is the nut-without-spring version. A spring nut holds itself in position in the channel while you set the fastener; without the spring you have to hold the nut in place, which is easy on horizontal strut but awkward overhead. If you are working alone on ceiling-hung strut, order the spring version instead.
3) What are the dimensions of the N228WOSS6 channel nut?
It measures 1.75 in length/depth, 1.375 in width, and .85 in height, and weighs .09 lb each. The 1.375 in dimension is what rides in the channel throat, so it is intended for standard 1-5/8 inch strut channel.
4) Can I use this channel nut to hang all-thread rod for conduit and pipe supports?
That is exactly what it is for. Thread 3/8"-16 all-threaded rod straight into the nut inside the strut channel and hang your trapeze, conduit clamps, or pipe rings off the rod. Keep the hung load inside the 800 lb slip rating.
5) Do I need to order bolts or hardware separately with these channel nuts?
Yes. The N228WOSS6 is the channel nut only, no spring, no bolt, no washer. Add your own 3/8"-16 rod or bolts plus any washers. For a 316 stainless installation, use 316 stainless fasteners too so you do not set up galvanic corrosion at the joint.
How fast can I get the B-LINE N228WOSS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE N228WOSS6 come with a warranty?
Absolutely. The B-LINE N228WOSS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE N228WOSS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE N228WOSS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.