You may also like
B-Line Eaton series strut fiberglass channel and fittings, 4" Height, 1.62" Length, 1.62" Width, 0.14lbs, Steel, Three hole 90° gussetted corner angle
Model: BLN-BFV371-2G
Eaton B-Line series strut fiberglass channel and fittings, 4" Height, 1.62" Length, 1.62" Width, 0.14lbs, Steel, Three hole 90° gussetted corner angle
B-LINE
$9,340.21
B-Line Eaton series strut fiberglass channel and fittings, 3.5" Height, 1.62" Length, 1.62" Width, 0.085lbs, Steel, Two hole splice plate
Model: BLN-BFV129
Eaton B-Line series strut fiberglass channel and fittings, 3.5" Height, 1.62" Length, 1.62" Width, 0.085lbs, Steel, Two hole splice plate
B-LINE
$4,702.01
B-Line Eaton series strut fiberglass channel and fittings, 1.62" Height, 3.25" Length, 1.62" Width, 0.078lbs, Steel, Two hole flat plate
Model: BLN-BFV340
Eaton B-Line series strut fiberglass channel and fittings, 1.62" Height, 3.25" Length, 1.62" Width, 0.078lbs, Steel, Two hole flat plate
B-LINE
$6,094.14
B-Line Eaton series strut fiberglass channel and fittings, 2.5" Height, 3.25" Length, 1.62" Width, 0.171lbs, Steel, Four hole 90° corner angle
Model: BLN-BFV558
Eaton B-Line series strut fiberglass channel and fittings, 2.5" Height, 3.25" Length, 1.62" Width, 0.171lbs, Steel, Four hole 90° corner angle
B-LINE
$9,734.84
B-Line Eaton series strut fittings and accessories, 2.31" Height, 2.31" Length, 1.62" Width, 0.12lbs, Steel, Pre-assembled fitting, Two hole corner an
Model: BLN-B101HDG
Eaton B-Line series strut fittings and accessories, 2.31" Height, 2.31" Length, 1.62" Width, 0.12lbs, Steel, Pre-assembled fitting, Two hole corner angle, 90 deg, Hot-dipped galvanized
B-LINE
$2,968.53
Eaton B-Line series strut fiberglass channel and fittings, 2.31" Height, 1.62" Length, 1.62" Width, 0.001lbs, Steel, Two hole 90° corner angle
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 2.31 in
- Product Length Depth:
- 1.62 in
- Product Weight:
- .001 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Two hole 90° corner angle
- Product Details:
- Two hole 90° corner angle
- Product Material:
- Steel
B-LINE BFV101 – Frequently Asked Questions
1) Is the B-Line BFV101 angle fitting steel or fiberglass?
Steel. The BFV101 corner angle is a steel fitting sold within the Eaton B-Line strut fiberglass channel and fittings range, so if you are building a non-metallic run for a corrosive or wash-down area, a steel fitting at the joint is something to weigh against the channel material you are using.
2) What is the B-Line BFV101 corner angle used for in a strut channel run?
The BFV101 is a two hole 90 degree corner angle fitting from the Eaton B-Line strut channel and fittings line. It joins two runs of strut at a right angle, or braces a strut run back to a wall or structural member, with one bolt hole in each leg. Use it wherever a run has to turn a corner or needs a gusset at the joint rather than relying on the channel nut alone.
3) What size is the B-Line BFV101 two hole corner angle?
It measures 2.31 in by 1.62 in by 1.62 in, listed as height, length/depth and width. That footprint sits within the face of standard 1-5/8 in strut channel, so the fitting will not overhang the channel when bolted to the face.
4) Does the B-Line BFV101 angle carry a UL listing or other certification?
No certification applies to the BFV101 corner angle; it is catalogued with certifications as Not Applicable. If your spec calls for a listed support component, that requirement has to be met by the channel system and anchors you pair it with, not by this fitting.
5) What part number do I order for the B-Line 90 degree two hole angle?
Order it as BFV101, an Eaton B-Line strut fitting. That is the manufacturer part number and the only model on the item, so there is no finish or size suffix to specify.
How fast can I get the B-LINE BFV101 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BFV101 come with a warranty?
Absolutely. The B-LINE BFV101 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BFV101?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BFV101 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.