You may also like
B-Line Eaton series strut fittings and accessories, 5.37" Height, 5.37" Length, 1.62" Width, 1.43lbs, Steel, Five hole tee gusset plate, Electro-plate
Model: BLN-B532ZN
Eaton B-Line series strut fittings and accessories, 5.37" Height, 5.37" Length, 1.62" Width, 1.43lbs, Steel, Five hole tee gusset plate, Electro-plated zinc
B-LINE
$19,388.93
B-Line B136ZN Eaton series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Electro-plated
Model: BLN-B136ZN
Eaton B-Line series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, Electro-plated
B-LINE
$138.64
$119.59
B-Line B134LZN Eaton series strut fittings and accessories, 4.20" Height, 3.5" Length, 1.62" Width, 1.00lbs, Steel, Four hole gussetted corner angle, 90 deg | Left hand, Thickness 1/4 in, Electro-plated
Model: BLN-B134LZN
Eaton B-Line series strut fittings and accessories, 4.20" Height, 3.5" Length, 1.62" Width, 1.00lbs, Steel, Four hole gussetted corner angle, 90 deg | Left hand, Thickness 1/4 in, Electro-plated
B-LINE
$122.69
$98.37
B-Line B132PAZN Eaton series strut fittings and accessories, 5.37" Height, 5.37" Length, 1.62" Width, 1.00lbs, Steel, Flat five hole cross plate | Pre assembled, Thickness 1/4 in, Electro-plated
Model: BLN-B132PAZN
Eaton B-Line series strut fittings and accessories, 5.37" Height, 5.37" Length, 1.62" Width, 1.00lbs, Steel, Flat five hole cross plate | Pre assembled, Thickness 1/4 in, Electro-plated
B-LINE
$176.99
$171.67
B-Line Eaton series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thicknes
Model: BLN-B136GRN
Eaton B-Line series strut fittings and accessories, 5.37" Height, 3.5" Length, 1.62" Width, 1.175lbs, Steel, Flat four hole tee gusset plate, Thickness 1/4 in, DURA GREEN
B-LINE
$12,529.89
Eaton B-Line series strut fittings and accessories, 3.5" Height, 5.37" Length, 1.62" Width, 1.00lbs, Steel, Four hole tee gusset plate, Electro-plated zinc
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.5 in
- Product Length Depth:
- 5.37 in
- Product Weight:
- 1 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Tees / Crosses
- Product Type:
- Four hole tee gusset plate
- Product Finish:
- Electro-plated
- Product Details:
- Four hole tee gusset plate
- Product Material:
- Steel
- Product Length:
- 5.37 in
B-LINE B432ZN – Frequently Asked Questions
1) What is the B-Line B432ZN strut fitting used for?
The B432ZN is a four hole tee gusset plate for strut framing. It joins strut channel in a tee configuration, with the gusset adding stiffness at the joint so the connection resists racking. It is a steel plate fitting, so the strut, channel nuts and bolts are separate items you order alongside it.
2) Do I get the bolts and channel nuts with the B-Line B432ZN plate?
No. The B432ZN ships as the four hole tee gusset plate only. You supply the strut channel nuts and bolts sized to the hole pattern and to the channel you are fastening to, one set per hole.
3) What size is the B-Line B432ZN tee gusset plate?
The plate measures 5.37 inches in length, 3.5 inches in height and 1.62 inches in width, and it weighs 1 pound. Use the 5.37 inch dimension to check you have enough clear run on the strut face before the next fitting or hanger.
4) Is the B432ZN gusset plate suitable for outdoor or wet locations?
The B432ZN is steel with an electro-plated zinc finish. That is a indoor, dry-location coating typical of general electrical and mechanical work. For exterior, coastal or washdown areas, specify a hot dip galvanized or stainless version of the same fitting instead.
5) Should I use a gusset plate or a flat tee plate for a strut connection?
A flat tee plate is fine where the joint is only carrying load in shear and nothing is trying to twist it. The B432ZN is the gusseted version: the bent gusset stiffens the corner, so it holds the angle when a cantilevered arm or trapeze leg tries to rotate. If your tee is taking a bending load rather than just tying two pieces together, go gusseted.
How fast can I get the B-LINE B432ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B432ZN come with a warranty?
Absolutely. The B-LINE B432ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B432ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B432ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.