Eaton B-Line series strut fittings and accessories, 3.93" Height, 5.43" Length, 1.68" Width, 1.56lbs, Steel, Eight hole double wing fitting, Yellow zinc chromate
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 3.93 in
- Product Length Depth:
- 5.43 in
- Product Weight:
- 1.56 lb
- Product Width:
- 1.68 in
- Department:
- Electrical
- Product Type:
- Eight hole double wing fitting
- Product Finish:
- Yellow zinc chromate
- Product Details:
- Eight hole double wing fitting
- Product Material:
- Steel
- Product Length:
- 5.43 in
B-LINE B272YZN – Frequently Asked Questions
1) What is the Eaton B-Line B272YZN eight hole double wing fitting used for?
The B272YZN is a double wing strut fitting with eight bolt holes, used to join strut channel at a corner or tee where you need bolted connections on two planes at once. It is steel and measures 3.93 x 5.43 x 1.68 inches, so it spans a fair amount of channel face and carries load through eight fasteners rather than two or four.
2) Does the B-Line B272YZN double wing fitting come with the bolts and channel nuts?
No. The B272YZN is supplied as the steel fitting only, at 1.56 lb. You order the strut nuts, bolts, and washers separately, and you need enough sets for however many of the eight holes you intend to fasten through.
3) Is the yellow zinc chromate finish on the B-Line B272YZN fitting suitable for outdoor or wet locations?
Yellow zinc chromate is a plated finish for dry indoor service. It gives steel decent corrosion protection inside a building, but it is not the finish you want exposed to weather, washdown, or a corrosive process area. For rooftop, exterior, or wet work, specify a hot dip galvanized or stainless version of the fitting instead.
4) What part number do I order for the B-Line eight hole double wing strut fitting in yellow zinc?
Order Eaton B-Line B272YZN. The YZN suffix is the yellow zinc chromate finish; the same fitting body is offered in other B-Line finish suffixes if your spec calls for galvanized or stainless.
5) Does the B-Line B272YZN fitting carry a UL listing or other certification?
No certification is carried on the B272YZN double wing fitting. It is a mechanical steel support fitting, so if your submittal requires a listed or labelled support component, this one will not satisfy that line item.
6) How much does the B-Line B272YZN strut fitting weigh for my hanger load calculations?
1.56 lb per fitting. Worth adding in when you are stacking several of these on a trapeze or overhead rack run, since eight-hole double wing fittings tend to get used in multiples at every corner.
How fast can I get the B-LINE B272YZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B272YZN come with a warranty?
Absolutely. The B-LINE B272YZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B272YZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B272YZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.