You may also like
B-Line Eaton series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 1.96lbs, Steel, Fourteen hole double corner gussetted connectio
Model: BLN-B276GRN
Eaton B-Line series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 1.96lbs, Steel, Fourteen hole double corner gussetted connection, DURA GREEN
B-LINE
$35,848.30
$35,798.30
B-Line Eaton series strut fittings and accessories, 5.38" Height, 3.5" Length, 1.62" Width, 2.42lbs, Steel, Eight hole double corner gussetted connect
Model: BLN-B346LGRN
Eaton B-Line series strut fittings and accessories, 5.38" Height, 3.5" Length, 1.62" Width, 2.42lbs, Steel, Eight hole double corner gussetted connection | Left, DURA GREEN
B-LINE
$42,434.27
$42,384.27
B-Line B276ZN Eaton series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 1.96lbs, Steel, Fourteen hole double corner gussetted connection, Electro-plated
Model: BLN-B276ZN
Eaton B-Line series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 1.96lbs, Steel, Fourteen hole double corner gussetted connection, Electro-plated
B-LINE
$464.86
B-Line B276HDG Eaton series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 1.96lbs, Steel, Fourteen hole double corner gussetted connection, Hot-dipped galvanized
Model: BLN-B276HDG
Eaton B-Line series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 1.96lbs, Steel, Fourteen hole double corner gussetted connection, Hot-dipped galvanized
B-LINE
$609.51
B-Line B346RGRN Eaton series strut fittings and accessories, 5.38" Height, 3.5" Length, 1.62" Width, 2.42lbs, Steel, Eight hole double corner gussetted connection | Right, DURA GREEN
Model: BLN-B346RGRN
Eaton B-Line series strut fittings and accessories, 5.38" Height, 3.5" Length, 1.62" Width, 2.42lbs, Steel, Eight hole double corner gussetted connection | Right, DURA GREEN
B-LINE
$572.87
Eaton B-Line series strut fittings and accessories, 4" Height, 4" Length, 1.62" Width, 2.26lbs, Steel, Eight hole double corner gussetted connection, Electro-plated zinc
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 4 in
- Product Length Depth:
- 4 in
- Product Weight:
- 2.26 lb
- Product Width:
- 1.62 in
- Department:
- Electrical
- Product Type:
- Eight hole double corner gussetted connection
- Product Finish:
- Electro-plated
- Product Details:
- Eight hole double corner gussetted connection
- Product Material:
- Steel
B-LINE B362ZN – Frequently Asked Questions
1) What is the B-Line B362ZN strut fitting used for?
The B362ZN is an eight hole double corner gusseted connection fitting for strut channel framing. The gusseted corner braces two runs of strut meeting at a right angle, and the eight holes give you four bolt points per leg so the joint carries load in both directions instead of relying on a single fastener. Typical use is bracing trapeze supports, pipe racks, and equipment frames built from channel.
2) Do I need to order strut nuts and bolts separately for the B362ZN?
Yes. The B362ZN is the gusset plate only. You supply the channel nuts, bolts, and washers to suit the strut you are fastening to, and you will want enough hardware for the eight holes if you are bolting the connection out fully.
3) What size is the B-Line B362ZN corner gusset fitting?
It measures 4 x 4 x 1.62 inches and weighs 2.26 pounds. The two 4 inch legs are what you lay against each strut run, so allow at least that much clear channel either side of the corner for the fitting to seat and for the nuts to land.
4) Is the B362ZN strut bracket suitable for damp or outdoor use?
It is steel with an electro-plated zinc finish. That coating is aimed at dry indoor service, mechanical rooms, and covered areas. For exposed exterior runs, coastal sites, or wash-down environments, a hot dip galvanized or stainless fitting is the better call, because electro-plated zinc is a thin sacrificial layer and will bloom once it stays wet.
5) Should I use a gusseted corner fitting or a plain 90 degree angle bracket on my strut frame?
A plain angle bracket just ties two channels together at the corner and lets the joint rack under side load. The gusseted type, like the B362ZN, adds a triangulated web across the corner so the angle is held rigid. Use the gusset where the frame carries cantilevered weight, vibration, or seismic bracing duty; a flat angle or a simple two-hole corner is fine for light, fully supported runs where the frame is not the thing resisting movement.
6) What is the manufacturer part number for this B-Line gusseted corner fitting?
Order it as B362ZN from Eaton's B-Line series. The ZN suffix on the number is the electro-plated zinc finish, which is the identifier to match when you are standardizing fittings across a job so everything on the rack has the same coating.
How fast can I get the B-LINE B362ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B362ZN come with a warranty?
Absolutely. The B-LINE B362ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B362ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B362ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.