Eaton B-Line series strut fittings and accessories, 7.78" Height, 16" Length, 7.125" Width, 4.267lbs, Steel, Bracket, Electro-plated zinc
Manufacturer Resources
Product Specs
- Certifications:
- Not Applicable
- Product Height:
- 7.78 in
- Product Length Depth:
- 16 in
- Product Weight:
- 4.267 lb
- Product Width:
- 7.125 in
- Department:
- Electrical
- Product Group:
- Mounting Hardware
- Product Subgroup:
- Brackets
- Product Type:
- Bracket
- Product Finish:
- Electro-plated
- Product Details:
- Bracket
- Product Material:
- Steel
B-LINE B810-16ZN – Frequently Asked Questions
1) What are the dimensions of the Eaton B-Line B810-16ZN strut bracket?
The B810-16ZN measures 7.78 inches in height, 16 inches in length/depth, and 7.125 inches in width. That 16 inch dimension is what decides whether it clears the equipment you are bracing off the strut run, so measure your standoff before you order.
2) Is the B-Line B810-16ZN bracket suitable for outdoor or damp installations?
It is steel with an electro-plated zinc finish, which is a dry indoor-duty coating. For exterior runs, wash-down areas, or anywhere condensation collects, step up to a hot-dip galvanized or stainless fitting instead. Electro-plated zinc will rust at cut edges and fastener points in those conditions.
3) How much does the B-Line B810-16ZN bracket weigh, and does that matter for my seismic or load calcs?
Each B810-16ZN bracket weighs 4.267 lb. On a long strut run with brackets at regular spacing, add that into your dead load before you size the anchors into the deck or wall, the fitting weight adds up quickly across a rack.
4) Does the B-Line B810-16ZN bracket come with bolts, nuts, or strut channel nuts?
The B810-16ZN is sold as the bracket alone. Strut nuts, hardware, and the channel itself are ordered separately, so plan the fastener count per connection when you write the order or you will be short on the install.
5) What is the exact part number to order for this B-Line bracket?
Order it as Eaton B-Line B810-16ZN. The ZN suffix is the electro-plated zinc finish, so if a submittal calls for a galvanized or stainless version of the same bracket, that is a different suffix and a different part.
6) Is the B-Line B810-16ZN bracket a UL listed or certified product?
It is a structural strut fitting, not a listed electrical device, so it carries no product certification of its own. Listing requirements on a job normally attach to the raceway, enclosure, or luminaire being supported rather than to the mounting bracket.
How fast can I get the B-LINE B810-16ZN delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE B810-16ZN come with a warranty?
Absolutely. The B-LINE B810-16ZN is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE B810-16ZN?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE B810-16ZN from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.