Eaton B-Line series strut mounting bracket, Conduit and cable, 1" Height, 1" Length, 1" Width, 0.216lbs, Conduit size: 1" EMT/Rigid, Conduit and cable clamps, 1.1" Max mount size, 1.4" Min, 200 lbs load capacity, Pre-galvanized
Manufacturer Resources
Product Specs
- Application:
- Attaches to cable tray rungs and strut profiles
- Cable Diameter Min:
- 1.4 in
- Certifications:
- CE
- Load Capacity:
- 200 lbs
- Mounting Dimensions Max:
- 1.1
- Product Category:
- Conduit and cable
- Product Height:
- 1 in
- Product Length Depth:
- 1 in
- Product Weight:
- .216 lb
- Product Width:
- 1 in
- Department:
- Electrical
- Product Group:
- Conduit & Fittings
- Product Subgroup:
- Conduit Accessories
- Product Type:
- Conduit and cable clamps
- Product Size:
- Conduit size: 1 inch EMT/Rigid
- Product Details:
- Conduit and cable clamps
B-LINE BL100 – Frequently Asked Questions
1) Will the B-Line BL100 mount to strut channel and cable tray rungs?
Yes. The BL100 is a strut mounting bracket built to attach to cable tray rungs and strut profiles, with a maximum mounting dimension of 1.1 inches. If the rung or strut flange it has to grip is wider than 1.1 inches, this clamp will not close over it.
2) Is the Eaton B-Line BL100 bracket galvanized for damp or outdoor locations?
The BL100 is pre-galvanized steel, which is the standard finish for indoor and protected exterior strut work. For continuously wet, coastal, or corrosive environments, a hot dip galvanized or stainless clamp is the better call.
3) Can the BL100 be used to support cable instead of conduit?
It is a combination conduit and cable clamp, with a minimum cable diameter of 1.4 in. Below that diameter the cable will not seat properly in the clamp body.
4) What part number do I order to match existing BL series clamps in my building?
For 1 inch EMT or rigid on strut, the part is Eaton B-Line BL100. Ordering by that MPN keeps a facility standardized across repeat work, since the rest of the BL series follows the same body style in other conduit sizes.
5) How big is the BL100 clamp and what does one weigh?
Compact part: 1 inch height, 1 inch length, 1 inch width, weighing 0.216 lb each. Worth knowing when you are figuring clearance between parallel conduit runs on a strut rack, or estimating freight on a bulk order for a large job.
6) Does the Eaton B-Line BL100 carry any certification marking?
The BL100 conduit clamp is CE marked. That is the only certification carried on the part.
How fast can I get the B-LINE BL100 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE BL100 come with a warranty?
Absolutely. The B-LINE BL100 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE BL100?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE BL100 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.