You may also like
B-Line Eaton series TOLCO sway brace attachment, Electro-galvanized, 2015 lbs, Steel, Fig 4L, 3" pipe size, Longitudinal in-line sway brace attachment
Model: BLN-FIG 4L 3 EG
Eaton B-Line series TOLCO sway brace attachment, Electro-galvanized, 2015 lbs, Steel, Fig 4L, 3" pipe size, Longitudinal in-line sway brace attachment
B-LINE
$155.57
$143.46
B-Line Eaton series TOLCO sway brace attachment, Electro-galvanized, 2015 lbs, Steel, Fig 4L, 8" pipe size, Longitudinal in-line sway brace attachment
Model: BLN-FIG 4L 8 EG
Eaton B-Line series TOLCO sway brace attachment, Electro-galvanized, 2015 lbs, Steel, Fig 4L, 8" pipe size, Longitudinal in-line sway brace attachment
B-LINE
$331.50
B-Line Eaton series TOLCO sway brace attachment, Plain, 2015 lbs, Steel, Fig 4L, 5" pipe size, Longitudinal in-line sway brace attachment
Model: BLN-FIG 4L-5-PLN
Eaton B-Line series TOLCO sway brace attachment, Plain, 2015 lbs, Steel, Fig 4L, 5" pipe size, Longitudinal in-line sway brace attachment
B-LINE
$162.60
$153.14
B-Line Eaton series TOLCO sway brace attachment, Plain, 2015 lbs, Steel, Fig 4L, 4" pipe size, Longitudinal in-line sway brace attachment
Model: BLN-FIG 4L 4 PLN
Eaton B-Line series TOLCO sway brace attachment, Plain, 2015 lbs, Steel, Fig 4L, 4" pipe size, Longitudinal in-line sway brace attachment
B-LINE
$136.94
$118.26
B-Line Eaton series TOLCO sway brace attachment, Plain, 2015 lbs, Steel, Fig 4L, 6" pipe size, Longitudinal in-line sway brace attachment
Model: BLN-FIG 4L 6 PLN
Eaton B-Line series TOLCO sway brace attachment, Plain, 2015 lbs, Steel, Fig 4L, 6" pipe size, Longitudinal in-line sway brace attachment
B-LINE
$201.61
Eaton B-Line series TOLCO sway brace attachment, Electro-galvanized, 2015 lbs, Steel, Fig 4L, 5" pipe size, Longitudinal in-line sway brace attachment
Manufacturer Resources
Product Specs
- Certifications:
- UL Listed
- Load Capacity:
- 2015 lbs
- Product Diameter:
- 5 in
- Product Height:
- 9.75 in
- Product Length Depth:
- 0 in
- Product Weight:
- 3.8 lb
- Product Width:
- 0 in
- Department:
- Electrical
- Product Type:
- Longitudinal in-line sway brace attachment
- Product Model:
- Fig 4L
- Product Finish:
- Electro-plated
- Product Size:
- 5 inch pipe size
- Product Details:
- Longitudinal in-line sway brace attachment
- Product Material:
- Steel
B-LINE FIG 4L 5 EG – Frequently Asked Questions
1) What is the load rating on the B-Line Fig 4L 5 inch sway brace attachment?
2015 lbs. That is the figure your engineer uses when checking the brace against the calculated seismic load for the zone of influence on that 5 inch main. If the calculated load at the brace point exceeds 2015 lbs, you need to shorten the spacing between braces or move to a higher capacity attachment.
2) Is a longitudinal in-line brace attachment the same as a lateral brace fitting?
No, and they are not interchangeable on the drawing. This Fig 4L is a longitudinal in-line attachment, meaning the brace runs parallel with the pipe and resists movement along the axis of the main. Lateral bracing resists side to side movement and uses a different attachment oriented across the pipe. A braced system needs both; specifying this part covers the longitudinal leg only.
3) Is electro-galvanized finish acceptable for an interior sprinkler riser, or do I need something heavier?
The Fig 4L here is steel with an electro-plated (electro-galvanized) finish, which is the standard choice for dry interior conditions such as concealed spaces, ceilings, and mechanical rooms. It is a thin sacrificial coating, so for exterior runs, parking structures, or corrosive or wash-down environments you should be specifying a hot dip galvanized or stainless equivalent instead.
4) How much clearance do I need above the pipe to install this brace attachment?
Allow for a 9.75 inch height on the attachment itself, measured on the fitting. In a tight ceiling cavity or close to a deck, check that dimension against your available space before the pipe goes up, because the brace member still has to land on the fitting at the correct angle once it is clamped.
5) Does the Fig 4L sway brace attachment come with the brace pipe and the structure attachment?
No. The Fig 4L is the pipe-end fitting only, ordered as one piece under part number FIG 4L 5 EG. You still need the brace member itself plus a structural attachment at the building side to complete the brace assembly. Order those separately and size the brace pipe to the length your layout calls for.
How fast can I get the B-LINE FIG 4L 5 EG delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FIG 4L 5 EG come with a warranty?
Absolutely. The B-LINE FIG 4L 5 EG is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FIG 4L 5 EG?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FIG 4L 5 EG from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.