B-Line Eaton series wall mount 14.25 inch shelf width distribution , 108" height, 94" length, 21.375" width, 3 vertical with 12 shelves, ASTM A36 stru

It is a universal distribution frame for wall mounting, built to support terminal blocks for central cross connects. Think telecom and low-voltage cross-connect fields in a riser closet, MDF room or equipment room, where punch blocks and cable management need a rigid steel backbone rather than loose plywood backboard mounting. The configuration is 3 vertical sections carrying 12 shelves.

Shipping/product weight is 130.486 lb for the frame itself, before any terminal blocks, cable or slack is added. Because it is wall mounted, that dead load plus the cross-connect field has to land on structure, not drywall alone. Plan on anchoring into concrete, CMU or a backing/stud layout that can carry it, and get two people on the lift given the 108 inch height.

Steel construction, specifically ASTM A36 structural steel, finished in Telco gray powder coat. That is the standard finish for telecom distribution hardware, so it matches typical existing frames and racks in a carrier or campus MDF room.

Wall mount. It is a universal distribution frame designed to hang off the wall rather than stand on the floor, which keeps the floor clear in a tight closet. If your room has no wall structure capable of carrying the load, or you need aisle access from both sides, a floor-mounted frame or open relay rack is the better call.

The frame is configured with 3 vertical sections and 12 shelves at 14.25 inch shelf width, so you get four shelf positions per vertical for mounting terminal blocks and cross-connect hardware. Terminal blocks, wire management and anchors are specified separately.

Order by manufacturer part number SB61710803TG from Eaton's B-Line series. That number covers the complete 3-vertical, 12-shelf wall mount frame in Telco gray.