B-Line Eaton series wall mount 14.25 inch shelf width distribution , 138" height, 123" length, 21.375" width, 6 vertical with 16 shelves, ASTM A36 str

It weighs 313.912 lb bare, before any terminal blocks, cross connect wire or cable is added. That is a load the wall structure has to carry, so it wants anchoring into structural framing or solid masonry rather than drywall anchors, and it is not a one person lift. The frame itself is steel.

No. This is a distribution frame for terminal blocks and central cross connects, with 6 verticals and 16 shelves at 14.25 inch shelf width. If you need to mount rack ear equipment such as switches, patch panels or servers, you want a standard 19 inch EIA rack or wall mount cabinet instead.

It is a wall mounted universal distribution frame built to support terminal blocks for central cross connects, the kind of backbone termination point you find in a telecom room or MDF. The 6 verticals with 16 shelves give you the shelf capacity to lay out block fields and route cross connect wire between them, rather than housing rack mount equipment.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the common structural grade for load bearing steel shapes, and the powder coat gives an indoor telecom room finish that matches typical central office and MDF hardware.

Order by the Eaton B-Line part number. This configuration is SB61713806TG: wall mount, 6 verticals, 16 shelves, 14.25 inch shelf width, 138 inches high by 123 inches long by 21.375 inches wide. B-Line builds these frames in a range of vertical and shelf counts, so confirm the vertical count and shelf count against your block field layout before you commit to a part number.

No certification applies to this frame. It is a mechanical steel support structure for terminal blocks and cross connect hardware, not an electrical device, so specify it on structural and dimensional grounds rather than a listing mark.