B-Line Eaton series wall mount 14.25 inch shelf width distribution , 84" height, 71" length, 21.375" width, 6 vertical with 9 shelves, ASTM A36 struct

Plan for a footprint of 84 inches high, 71 inches long, and 21.375 inches deep off the wall. That 84 inch height means you need a clear wall run of at least seven feet with no conduit, panel, or ductwork crossing it, and the 71 inch length is the horizontal span the frame occupies. Allow working clearance in front of the 21.375 inch depth for terminating and dressing cross connects.

The frame alone weighs 208.216 lb before a single terminal block or cable bundle goes on it. On masonry or concrete that is straightforward; on a stud wall you need to hit structure or add backing plywood, and your anchors have to carry the frame weight plus the loaded shelves. Size the fasteners for the steel construction and the added weight of the cross connect hardware you are mounting.

The configuration is 6 verticals with 9 shelves, so you get nine horizontal shelf levels spanning six vertical uprights across the 71 inch length. That is how you scale block count in one structure instead of hanging multiple separate backboards.

Yes. The SB61708406TG is built around a 14.25 inch shelf width, so hardware sized to that dimension seats correctly across all nine shelves. Confirm your terminal block footprint against 14.25 inches before ordering.

Construction is ASTM A36 structural steel with a Telco gray powder coat, which is the standard finish for telecom equipment rooms so it matches adjacent racks and ladder rack. Steel throughout means it takes the load of fully populated cross connect blocks without deflection at the shelf.