B-Line Eaton series wall mount 9.25 inch shelf width distribution , 120" height, 110" length, 16.375" width, 6 vertical with 14 shelves, ASTM A36 stru

It weighs 260.863 lb bare, before any terminal blocks, cable or equipment go on the 14 shelves. That is a wall-mounted load, so the mounting surface has to be structural, masonry, concrete or backed by plywood and studs, and the anchors sized for the loaded weight, not the shipping weight.

Six verticals with 14 shelves. That layout is what you want when you are terminating a large block count in one room and need the shelves to break the field up by service or by building riser rather than running one continuous wall of blocks.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the standard hot-rolled structural grade, so the frame is built as steel structure rather than formed sheet, and the powder coat is the usual telecom room color for matching existing distribution frames.

A wall mount frame like the SB61512006TG keeps the floor clear and puts the termination field at the wall, which suits a cross-connect or entrance room where copper blocks, not equipment, are the load. Choose a floor-standing frame or relay rack instead when you need rear access, deep equipment, or when the wall cannot be verified to carry a 260.863 lb frame plus cable.

Order Eaton B-Line SB61512006TG. That single model number covers the 120 inch high, 110 inch long, 16.375 inch wide frame with 9.25 inch shelf width, six verticals and 14 shelves, in Telco gray.

The frame projects 16.375 inches off the mounting surface, so plan the working aisle from that face, not from the wall. With shelves 9.25 inches wide there is room within that depth for the block field and the cable that lands on it.