B-Line Eaton series wall mount 9.25 inch shelf width distribution , 138" height, 123" length, 16.375" width, 10 vertical with 16 shelves, ASTM A36 str

It weighs 491.93 lb bare, before any terminal blocks, cable or hardware go on it. That is a load that has to land on structure, not drywall or a single stud line. Plan anchorage into concrete, masonry or a continuous plywood backboard fastened to framing, and size the fasteners for the loaded weight, not the shipping weight.

It is built as a 10 vertical configuration with 16 shelves, with a 9.25 inch shelf width for mounting terminal blocks and protector modules. That gives 160 mounting positions across the frame, which is what you size against your pair count when laying out a main or intermediate distribution frame.

Yes. The application for the SB61513810TG is corner mounted with the SB658 terminal block mount plate, so it is intended for a corner run rather than only a flat single-wall layout. If you are ordering for a corner installation, confirm the SB658 plates are on the order, since the mount plate is what carries the blocks.

Steel construction, specifically ASTM A36 structural steel, with a Telco gray powder coat finish. A36 is the standard hot-rolled structural carbon steel grade, so the frame is built from structural section rather than light formed sheet. The powder coat keeps it to the usual telecom equipment room color scheme.

No. It is the frame and shelf structure only, a universal distribution frame wall mount in a 10 vertical, 16 shelf arrangement. Terminal blocks, protector modules, and the SB658 mount plates for corner mounting are separate items you specify to match your pair count and block type.

A wall mount unit like this one transfers its entire load, 491.93 lb plus cable and blocks, into the wall, so it suits rooms with solid masonry or concrete walls and limited floor area. If your telecom room has stud-and-drywall walls or you need access from both sides, a floor-standing or aisle-mounted frame is the better route. Also check depth: this one projects only 16.375 inches off the wall, which keeps the aisle clear.

Order it as Eaton B-Line SB61513810TG. That number covers the 138 inch high, 123 inch long, 10 vertical / 16 shelf configuration in Telco gray. B-Line's SB frame numbers change with vertical count and shelf count, so match the full designation rather than the family prefix.