B-Line Eaton series wall mount 9.25 inch shelf width distribution , 138" height, 123" length, 16.375" width, 4 vertical with 16 shelves, ASTM A36 stru

It is configured as 4 verticals with 16 shelves, so four uprights carrying four shelf levels across. Shelf width is 9.25 inches. That is the full configuration as supplied, not a base frame you build up from.

The frame alone weighs 195.614 lb before any terminal blocks, cross-connect, or cable are loaded on it. Spread over a 123 inch run it is not a heavy point load, but it needs to land on structure, not drywall alone: block, concrete, or studs/backer board rated for the fastening. Size your anchors for the frame weight plus everything you plan to terminate on it.

ASTM A36 structural steel with a Telco gray powder coat. A36 is the standard structural mild steel grade, and the powder coat is the gray finish used through telecom rooms so the frame matches adjacent racks and backboard hardware. Steel construction means it takes punched shelf loading and cable weight without the deflection you get from lighter formed channel.

It is a wall mounted universal distribution frame (UDF) for telecom and low voltage rooms: the shelves carry terminal blocks and cross-connect fields so incoming service pairs and station cable land and get jumpered in one organized wall run. The stated application is corner mounted SB658 terminal block mount plate, so the shelf layout is built around that block mounting.

What you get is the frame: 4 verticals, 16 shelves, steel, Telco gray. Terminal blocks, the SB658 corner mount plates the frame is set up for, jumper rings, and wall anchors are separate items you order to suit the termination count. Plan the block quantity off the 9.25 inch shelf width before you order.

The SB61513804TG is a wall mount frame, so all the load transfers into the wall structure and the floor stays clear underneath for conduit stub-ups and housekeeping. Choose it when you have a solid backboard wall and want the floor open. If your wall is light framing that cannot take 195.614 lb plus cable, or you need the frame free-standing in the middle of the room, a floor mounted distribution frame is the right call instead.

Order model SB61513804TG from Eaton B-Line. That single number covers the 138 inch high, 123 inch long, 16.375 inch wide frame with 4 verticals and 16 shelves at 9.25 inch shelf width in Telco gray.

No certification is carried on the SB61513804TG frame. It is a structural steel mounting frame rather than an electrically energized product, and the material is called out to ASTM A36. If your spec demands a listed assembly, that listing will come from the equipment you mount on the frame, not the frame itself.