B-Line Eaton series wall mount 9.25 inch shelf width distribution , 140" height, 123" length, 16.375" width, 6 vertical with 16 shelves, ASTM A36 stru

Shipping/product weight is 298.799 lb for the frame alone, before any terminal blocks, cable or shelf-mounted gear go on it. That is a steel assembly hanging off a wall, so it wants solid structural backing, blocking or unistrut into studs or masonry rather than drywall anchors. Plan for two people minimum on the set.

Yes. The application for this frame is corner mounted SB658 terminal block mount plates, so the shelf and vertical prep is intended for that plate. The plates themselves are separate line items and are not part of the frame order.

It describes the frame's capacity layout: six vertical sections with sixteen shelves total for terminal block and cross-connect hardware. Shelf width is 9.25 inches. That configuration is fixed on the SB61514006TG, so if you need a different number of verticals or shelves you are choosing a different frame in the series, not an option on this one.

Fabricated from ASTM A36 structural steel with a Telco gray powder coat. That is the standard central-office and telecom-room finish, so it matches existing gray UDF ironwork and racks in a communications room rather than standing out.

A wall mount universal distribution frame carries its load into the wall structure and leaves the floor clear, which is why it is used in telecom and MDF/IDF rooms for terminal block and cross-connect work rather than for rack-mount active equipment. If you are installing switches, servers or anything in 19 inch EIA rack units, a floor-standing rack or cabinet is the correct product. Use the UDF when the job is copper termination and cross-connect on shelves.

Order by Eaton B-Line manufacturer part number SB61514006TG. That number carries the whole configuration: the 6 vertical, 16 shelf universal distribution frame, wall mount, in Telco gray. There are no finish or size options to specify on top of it.