You may also like
Eaton B-Line series Flextray wire basket tray
Manufacturer Resources
Product Specs
- Certifications:
- UL Classified
- Compliances:
- CSA
- Product Height:
- 4 IN
- Product Length Depth:
- 4 IN
- Product Weight:
- .098 LB
- Product Width:
- 12 IN
- Department:
- Electrical
- Product Type:
- Blind ends
- Product Finish:
- Stainless steel type 316
- Product Details:
- Blind ends
- Product Material:
- Steel
B-LINE FT BE 4X12 SS6 – Frequently Asked Questions
1) What size Flextray does the B-Line FT BE 4X12 SS6 blind end fit?
The FT BE 4X12 SS6 blind end is sized for a 4 inch deep by 12 inch wide Flextray run. The part measures 4 inches in height and 12 inches in width, so it caps the open cut end of a 4 x 12 wire basket tray. If your tray is a different width or depth, you need the blind end matching that size.
2) Is the SS6 suffix on the B-Line Flextray blind end stainless steel, and which grade?
SS6 means type 316 stainless steel. The blind end is a steel part finished in stainless steel type 316, which is the grade specified for corrosive and washdown environments such as food processing, coastal installations, wastewater plants and chemical areas. If your run is indoor and dry, a lower cost finish on the same part geometry is the usual choice.
3) Why would I use a blind end on a wire basket cable tray run?
A blind end caps the cut end of a Flextray wire basket run so the sheared wire ends are covered. That protects cable jackets from being cut on the exposed wire tips during pulls and gives the terminated run a finished edge. It is a job-finishing accessory, not a structural component, and it does not carry load or splice two sections together.
4) Is the B-Line FT BE 4X12 SS6 blind end UL listed or CSA compliant for a spec job?
It is UL Classified and CSA compliant. That is what an institutional or electrical inspector on a spec job will look for on cable tray accessories, so the part can be called out on the submittal alongside the Flextray run it caps.
5) How many blind ends do I need to order for a Flextray installation?
Order one FT BE 4X12 SS6 per open tray end on a 4 x 12 run. A straight run terminating at a wall or panel takes one; a run cut at both ends takes two. Count the terminations on the drawing rather than the number of tray sections, since intermediate joints are spliced rather than capped.
How fast can I get the B-LINE FT BE 4X12 SS6 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE FT BE 4X12 SS6 come with a warranty?
Absolutely. The B-LINE FT BE 4X12 SS6 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE FT BE 4X12 SS6?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE FT BE 4X12 SS6 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.