You may also like
Manufacturer Resources
Spec Sheet
Product Specs
- Phase Shift:
- Three-phase
- Special Features:
- Used with Pow-R-Way Low Voltage Busways
- Department:
- Electrical
- Product Type:
- 100% neutral stab
- Product Details:
- 100% neutral stab
- Product Design:
- Pow-R-Way
- Application:
- Busway
B-LINE PWN600 – Frequently Asked Questions
1) What busway system does the B-Line PWN600 cable tap box work with?
The PWN600 plug-in cable tap box unit is built for Pow-R-Way low voltage busway. It plugs onto the busway run and gives you a point to land cable, so it is not a general-purpose tap box for other manufacturers' bus systems.
2) Is the B-Line PWN600 tap box three-phase, and does it carry a full neutral?
Three-phase, and it is a 100 percent neutral stab unit. That full-capacity neutral matters on runs feeding non-linear loads like lighting ballasts, VFDs and IT equipment, where harmonic currents can push neutral current up toward or past phase current. If your Pow-R-Way run was specified with a 100 percent neutral, this is the matching tap.
3) What does a plug-in cable tap box actually do on a busway run?
It is the transition from bus to wire. The unit stabs onto the plug-in openings of the Pow-R-Way busway and gives you an enclosed gutter to terminate feeder cable running off to a panel, disconnect or piece of equipment. Electricians reach for one when the load is fed by conductors rather than by a bus plug with a breaker or fusible switch in it.
4) Should I order a cable tap box or a fusible bus plug for my busway tap?
Depends on where the overcurrent protection lives. The PWN600 cable tap box is an unprotected tap point: it connects the busway to cable and nothing more, so the protection has to sit at the equipment end or elsewhere in the design. A fusible or breaker-type bus plug puts the disconnect and protection right at the busway. Pick the tap box when you are feeding a downstream panel or switchboard that already has main protection, and the plug when you need a local disconnecting means at the run.
5) What is the manufacturer part number for the B-Line Pow-R-Way cable tap box?
Order it as PWN600 from B-Line. That single MPN covers the unit, so there is no size or finish option to specify alongside it.
How fast can I get the B-LINE PWN600 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the B-LINE PWN600 come with a warranty?
Absolutely. The B-LINE PWN600 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the B-LINE PWN600?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the B-LINE PWN600 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.