You may also like
BALDWIN Estate 4408 12" Center to Center Contemporary Pull
KEY FEATURES
- Solid brass construction, feeling the difference in quality in every piece of cabinet hardware.
- Nickel plating is oxidized and then hand relieved and lacquered to embody the look of treasured antiquity.
- Mounting Hardware included
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Cabinet Hardware
- Product Subgroup:
- Cabinet Knobs and Pulls
- Commercial/Residential:
- Residential
- Collection:
- Estate Series
- Product Type:
- Door Pull
- Subcategory:
- Cabinet Knobs and Pulls
- Product Model:
- 4408
- (CTC) Center-to-Center:
- 12"
- Product Substrate:
- Brass
- Product Category:
- Cabinet Hardware
- Department:
- Door Hardware
Baldwin 4408190 – Frequently Asked Questions
1) What is the hole spacing on the Baldwin Estate 4408 pull, and will it drop into my existing cabinet holes?
The Estate 4408 is a 12 inch center-to-center pull, so the two mounting holes in your door or drawer front must be exactly 12 inches apart. If the existing bores are a common 3, 3-3/4, 5 or 8 inch spread, this pull will not line up without drilling new holes.
2) Do I need to buy screws separately for the Baldwin 4408 cabinet pull?
No. Mounting hardware comes with the 4408 pull, so the screws for fastening it through the door or drawer front are in the box.
3) What finishes does the Baldwin Estate 4408 12 inch pull come in?
Six: 031 Non-Lacquered Brass, 044 Satin Brass PVD, 055 Polished Nickel PVD, 150 Satin Nickel, 190 Satin Black and 260 Polished Chrome. The two PVD finishes (044 and 055) are the ones to pick where you want the color held over time; 031 Non-Lacquered Brass is a living finish and will patina with handling.
4) Is the Baldwin 4408 appropriate for a commercial job or multi-family corridor hardware?
It is a residential-grade cabinet pull from Baldwin's Estate Series. Use it on kitchen cabinetry, appliance panels and millwork in homes and residential units. For public-side openings needing an ANSI/BHMA graded commercial pull, specify a commercial door pull instead.
5) Can the 12 inch Baldwin 4408 pull be used as an appliance or tall pantry door pull?
Yes. At 12 inches center-to-center it is a long pull, the size normally used for refrigerator and dishwasher panels, pantry doors and tall pull-out cabinets rather than small drawers. Solid brass construction means it holds up to the leverage a full-height door puts on it.
6) Will the nickel finish on the Baldwin Estate pull match older Baldwin hardware already in the kitchen?
The nickel plating on Estate pieces is oxidized, then hand relieved and lacquered for an aged look, so there is natural variation piece to piece. Ordering by the same finish code (150 Satin Nickel or 055 Polished Nickel PVD) across the run is how you keep a kitchen consistent; mixing a PVD finish with a hand-relieved one will read differently in the same light.
How fast can I get the Baldwin 4408190 delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 4408190 come with a warranty?
Absolutely. The Baldwin 4408190 is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 4408190?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 4408190 from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.