Baldwin 5105 Lever Passage w/ 5046 Rose

No handing to specify. The 5105 is reversible, and the set ships with the levers and roses for both left and right hand doors. One part number covers either swing, which matters if you are ordering a dozen for a building and don't want to survey every opening first.

It does not lock. Passage function means the lever retracts the latch from both sides at all times, with no keyway and no privacy turn. Use it on hall, closet, and pantry doors. For a bedroom or bathroom you want a privacy set instead, and for a lockable entry you want a keyed function.

It installs into the standard 2-1/8 inch cross bore already in most doors, with a 2-3/8 inch backset. If your existing lever came out of a 2-1/8 inch bore on a 2-3/8 backset, the 5105 goes back in the same hole. A door bored at 2-3/4 backset is the case to watch for, since that is the other common commercial backset.

It is a residential lever from Baldwin's Estate Series, meant for homes and finished residential interiors. For a commercial corridor or an apartment building common area, step up to a Grade 1 or Grade 2 commercial passage set: the Falcon K101 is Grade 1 heavy duty passage, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage lever. Both are made for the traffic and abuse a residential Estate lever is not.

The 5105 passage covers halls and closets that need a latch. Baldwin builds the same 5105 lever with the 5046 rose in privacy and dummy functions as well, pre-configured as separate part numbers, so bedrooms and baths get the privacy version and a false-front or double closet door gets the dummy. Same lever and rose across all three, so the house reads consistent.

No, it tops out at 1-3/4 inches. For a 2 inch door you need a lock with a wider thickness range: the Hager 2510 Grade 2 passage lever covers 1-3/8 to 2 inches, and the Falcon K101 Grade 1 passage goes 1-3/8 to 2-1/4 inches. Either handles a thick slab the Baldwin cannot.

The Baldwin 5105 with 5046 rose is a residential passage leverset in the Estate Series, with no locking or privacy feature. For an opening that needs commercial cycle life in the same non-keyed passage function, the Falcon K101 is a Grade 1 heavy duty passage cylindrical lock, fire rated, with non-handed levers and a 1-3/8 inch to 2-1/4 inch door thickness range. The Corbin Russwin CL3110 is another Grade 1 passage/closet lever, vandal resistant and fire rated, for 1-3/4 inch to 2 inch doors. Both hold the same door-open-either-way behavior as the 5105 while carrying a commercial grade the Baldwin does not.

The 5105 lever with 5046 rose is passage function, meaning it latches but does not lock. For a bed or bath door needing a thumbturn, the Kwikset 300BRNL RDT Breton is a Grade 3 privacy leverset for 1-3/8 inch to 1-3/4 inch doors, the same thickness range the 5105 covers. In knob form, the Arrow MK02-TA is a Grade 1 privacy lock with a Tudor knob, non-keyed and fire rated. The Hager 2540 with the Withnell lever fits 1-3/8 inch to 2 inch doors.

The Baldwin 5105 with 5046 rose is a working passage set: it has a latch, turns to retract it, and is supplied with the parts to install onto the door. A dummy lever has no latch at all and is surface applied - it is pull-only trim for a closet or French door that catches on a roller or ball catch. Dummy options include the Emtek Classic Brass Cortina lever dummy pair, the BEST 7KC Series single dummy trim in Grade 2, and the BEST 9K Series 1DT single dummy trim in Grade 1 heavy duty. Ordering a dummy where a passage set is wanted leaves the door with nothing to hold it shut.

The Baldwin 5105 with 5046 rose works on doors from 1-3/8 inch to 1-3/4 inch thick. On a heavier or built-up door, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch, and the Hager 2510 Grade 2 passage lever with the Withnell design covers 1-3/8 inch to 2 inch. The Arrow GL01 Grade 2 passage lock with the Sierra lever is built for 1-3/4 inch to 2 inch doors, so it starts where the 5105 stops.

The Baldwin 5105 with 5046 rose is passage function - it never locks, so it is wrong for a room that has to stay secured. For a storeroom, the Cal-Royal AG05 is a Grade 2 storeroom lever lockset with a deadlocking latchbolt for 1-3/8 inch to 1-3/4 inch doors, matching the thickness range the 5105 covers, and the Hager 2580 is a Grade 2 storeroom lock with the Withnell lever for 1-3/8 inch to 2 inch doors. For a utility or institutional room, the Dexter C1000 asylum lock is Grade 1 for 1-3/8 inch to 2 inch doors.

Projection is 1.938 inches off the face, with a 3.625 inch lever grip. Worth checking where a door swings back against a wall, a cabinet run, or another door in a tight hallway, since that projection plus the grip length is what contacts the wall before the door is fully open.

Eleven finishes, and they run wider on the brass side than most lines: Polished Brass (003), Non-Lacquered Brass (031), Vintage Brass (033), Satin Brass (044), Polished Nickel (055), Satin Nickel (056), Graphite Nickel (076), Oil Rubbed Bronze (102), Venetian Bronze (112), Satin Black (190), and Polished Chrome (260). Non-Lacquered Brass is the living finish, it will patina with handling; if you are matching existing hardware that has stayed bright, Polished Brass 003 is the lacquered one.

No. The passage set comes with everything needed to mount it on the door, including the 5046 roses for both sides. You are ordering one line item per opening, not a lever plus latch plus strike.

The Baldwin 5105 lever with 5046 rose uses a 2-3/8 inch backset and is non-keyed. The Cal-Royal AG00 entrance lever is Grade 2 with a 6-pin Schlage C keyway, keyed different, on a 2-3/8 inch backset, fitting 1-3/8 inch to 1-3/4 inch doors - the same thickness range the 5105 covers. If the entry door needs a deeper prep, the Cal-Royal AG03 classroom lever in the AG Series uses a 2-3/4 inch backset instead.

The Baldwin 5105 with 5046 rose is an Estate Series residential lever with a 3.625 inch grip and a 1.938 inch projection. For a straightforward passage lever on the same interior doors, the Callan Asheville is a Grade 3 passage leverset, and the Kwikset 200BRNL RDT Breton is a Grade 3 passage lever for 1-3/8 inch to 1-3/4 inch doors, matching the thickness range the 5105 works on. Bravura offers passage leversets in Grade 2 across several trims - Atlanta and Orlando with round trim, Tampa with square trim - if the doors want a defined rose shape.

The Baldwin 5105 with 5046 rose is a residential Estate Series passage lever offered in eleven finishes including Polished Brass, Satin Nickel, Oil Rubbed Bronze, Satin Black and Polished Chrome, which helps when interior doors need to match existing decorative hardware. Where the standard is written to a commercial grade instead, the Accentra 5301LN Augusta is a Grade 2 passage/closet cylindrical lever in the 5300 Series and the Accentra 4601LN is a Grade 2 passage lever with Augusta trim in the 4600 Series, so the same trim design carries across two series. The Design Hardware J75 flat lever passage set is Grade 2 and the X75 is Grade 1, both for 1-3/4 inch doors, giving one lever shape at two duty levels within a building.

No. The Baldwin 5105 with 5046 rose is a mechanical passage lever with no locking or privacy feature - it latches the door and turns from both sides. Keyless lever locks are a separate item: the Lockey 2835 is a mechanical pushbutton keyless lever lock with passage function and ADA compliance for 1 3/16 inch to 2 inch doors, the Lockey 2835DC adds a double combination, and the Lockey 1150 is a heavy duty mechanical keypad lever set with double combination in passage function for 1-1/8 inch to 2 inch doors. The Delaney LP250 and the Emtek Classic Keypad Leverset are electronic keypad leversets.

The Baldwin 5105 with 5046 rose is reversible and ships with the parts for left and right handed doors, so one part number covers either swing. Several commercial passage levers work the same way: the Falcon B101 is a Grade 2 medium duty passage lever with a non-handed design, and the Falcon K101 is a Grade 1 heavy duty passage lock with non-handed levers. That means a mixed-swing corridor can be ordered as a single line item rather than split by hand.

The 5105 with 5046 rose is non-keyed passage. For a keyed exterior door in a decorative lever, Deltana offers entry leversets in several trims - the 5851 Claremont, and the 6201 Manchester, 6411 Morant and 6431 Linstead, each covering 1-3/8 inch to 2 inch doors, which includes the 1-3/8 inch and 1-3/4 inch doors the 5105 is used on. In a commercial entry, the Hager 2525 is a Grade 2 cylindrical entry lock with a lever handle for 1-3/8 inch to 2 inch doors and the Dexter C1000 entry/office lever is Grade 1 with clutching for 1-3/8 inch to 1-3/4 inch doors.

The 5105 is a lever, paired with the round 5046 rose. Baldwin builds the Estate Series with both knob and lever trim on matching roses, so you can run levers on the doors that need easier operation and knobs elsewhere while keeping one rose shape and one finish through the house. A lever is the choice where someone with full hands or limited grip has to work the door.