Baldwin 85320 Madison Sectional Trim w/ 5015 Classic Knob or 5445V Classic Lever

It is a residential product. The 85320 Madison is part of Baldwin's Estate Series and is built for houses, high-end multi-family front doors, and interior applications, not for the cycle counts of a commercial opening. For an office, school, or retail entry you want a cylindrical lockset with a stated ANSI grade instead, like the Grade 1 Dexter C1000 Entry/Office lever or the Grade 2 Hager 2525 entry lock.

Handing matters, but only if you take the lever. Every lever configuration of the 85320 is ordered left hand or right hand, in entry and in dummy alike. The knob configurations (single cylinder, double cylinder, and full dummy with interior knob) carry no handing call-out. Stand outside the door: if the hinges are on your left, it is left hand.

The single cylinder 85320 is keyed from the outside only and releases from the inside by turning the knob or lever. The double cylinder version takes a key on both sides, which is what people specify when there is glass in or beside the door and a smashed pane would otherwise let someone reach the inside trim. Both are entry function. Check your local egress code before choosing double cylinder on a primary exit door.

The Baldwin 85320 Madison sectional trim is an Entry function handleset built on the Estate Series, offered with the 5015 Classic knob or the 5445V Classic lever inside. If you want a decorative keyed entry lever in the same residential vein rather than a full handleset, the Deltana 6201 Manchester Lever is an Entry function lever that fits doors 1-3/8 inch to 2 inch thick, and the Deltana 6411 Morant Lever is the same Entry function over the same 1-3/8 inch to 2 inch thickness range with a different lever shape. Both cover the same door thickness window the 85320 does, 1-3/8 inch through 2 inch, so an opening prepped for the Baldwin accepts either without changing the door.

No, those are a different function. The Baldwin 85320 Madison is an Entry function set, keyed from the outside in its single cylinder and double cylinder configurations. The Kwikset 200BRNL Breton is a Grade 3 passage lever for doors 1-3/8 inch to 1-3/4 inch, and the Bravura Atlanta and Bravura Orlando round trim leversets are Grade 2 passage. Passage levers have no cylinder and always retract the latch, so they suit a hall or closet, not a door that has to lock behind you. For a bed or bath door the Kwikset 300BRNL Breton is the Grade 3 privacy version with the same 1-3/8 inch to 1-3/4 inch thickness range.

The Baldwin 85320 Madison is offered in single cylinder and double cylinder keyed configurations. If your building standard is a 6-pin Schlage C keyway, the Cal-Royal AG00 entrance lever is Grade 2 with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset for doors 1-3/8 inch to 1-3/4 inch, the Cal-Royal AG03 classroom lever is the same keyway with a 2-3/4 inch backset, and the Arrow MK33-BD-CS carries a conventional cylinder in Schlage C. Confirm the backset before ordering, since the AG00 and AG03 differ there.

The Baldwin 85320 Madison is a mechanical entry set, keyed by cylinder with no electrification. For an opening tied into access control, the Corbin Russwin CL33903 is a Grade 1 fail safe electrified cylindrical lever at 12VAC/DC with the NZ lever and D rose for doors 1-3/4 inch to 2 inch, and the keyed CL33903 in the CL33900 Series is the same fail safe 12VAC/DC lock in a keyed version over the same thickness range. Fail safe means the lever unlocks on loss of power, so verify that is the behavior your egress plan calls for.

The 85320 projects 3-1/8 inches off the face of the door. That matters where a storm door, a screen door, or a sidelight return sits close to the slab, because the grip has to swing clear of it. Measure the gap between your entry door face and the back of the storm door before ordering.

Yes. The 85320 Madison comes as a full dummy set in three configurations: with the interior knob, or with the lever in left hand or right hand. A full dummy has no latch, so it surface mounts and is used on the inactive leaf of a double door or on a door held by a roller catch. Order the same finish as your working handleset and the pair will match.

Fourteen finishes, which is what lets it match the rest of the hardware on a house: Polished Brass PVD (003), Non-Lacquered Brass (031), Vintage Brass (033), Satin Brass PVD (044), Satin Brass Black (050), Polished Nickel PVD (055), Satin Nickel (056), Satin Brass Brown (060), Graphite Nickel (076), Oil-Rubbed Bronze (102), Venetian Bronze (112), Satin Black (190), Polished Chrome (260), and Distressed Oil-Rubbed Bronze (402). The PVD finishes and Satin Nickel are plated over brass and hold up on a sun-facing or coastal door; Non-Lacquered Brass and the distressed bronze are living finishes that will patina on purpose.

No. The 85320 is an entry-function handleset, keyed from the outside, and it mounts as a full escutcheon handleset rather than a plain rose set. For an interior bedroom or bath you want a privacy lock, and for a hall or closet a passage lock. The Kwikset 300BRNL Breton privacy leverset and the Kwikset 200BRNL Breton passage leverset both cover 1-3/8 to 1-3/4 inch doors, and the Hager 2510 passage lever takes 1-3/8 to 2 inch doors if you need the wider range.

If the Madison handleset is more trim than the opening needs, Deltana's entry levers are the closer comparison: the 6201 Manchester, 6411 Morant, and 6431 Linstead are all entry function and all fit 1-3/8 to 2 inch doors, the same thickness span the 85320 covers. The Deltana 5851 Claremont is another entry lever in that family. The difference is form, not function, since those are lever sets on rose or plate rather than a full grip handleset.

Both are interior trim on the same 85320 Madison exterior grip, so the outside of the door looks identical either way. Take the lever if the door needs to be operable with a full hand or an elbow, or if you are matching lever trim elsewhere in the house; its grip runs 5-5/16 inches. Take the knob if the rest of the interior hardware is knob trim. One practical difference: the lever versions are handed left or right, the knob versions are not.

The Baldwin 85320 Madison sectional trim itself comes in a full dummy configuration with an interior knob, and in full dummy with lever in left hand and right hand versions, so the non-latching openings can carry the same Madison trim in the same finish. If you want a simple dummy lever on an interior door rather than a handset plate, the Emtek Classic Brass Cortina lever is sold as a dummy pair, the Emtek Arts and Crafts lever is a dummy pair, and the Callan Bentley is a Grade 2 dummy lever. The Emtek pairs give you both faces of the door; the Baldwin dummy is the Madison plate and grip.

The Baldwin 85320 Madison is an Estate Series entry set in fourteen finishes including 056 Satin Nickel, 102 Oil Rubbed Bronze and 003 Polished Brass PVD. For a rental front door where the trim does not need to be a decorative handleset, the Master Lock BC Series RL01 is a Grade 3 keyed entry lever, the Callan Bennett is a Grade 3 entrance leverset supplied as a deadbolt combo, and the Cal-Royal AUS00 is a Grade 3 entrance/office lever with a solid brass forged body for doors 1-3/8 inch to 1-3/4 inch. The Callan Bennett combo covers both the latch and the deadbolt on one door, which is closest in scope to what a keyed handleset does.

The Baldwin 85320 Madison is keyed, in single cylinder and double cylinder handleset configurations. To drop the key entirely, the Emtek Classic Keypad Leverset is a keypad lever in the Classic series, and the Delaney LP250 is a Grade 2 electronic keypad leverlock. For a mechanical pushbutton with no batteries, the Lockey 2835 is a keyless lever lock for doors 1-3/16 inch to 2 inch, the Lockey 2835DC is the double combination version over the same range, and the Lockey 1150 is a heavy duty mechanical keypad lever set for doors 1-1/8 inch to 2 inch. All of these are lever sets rather than the Madison sectional plate and grip, so the door face changes.

The Baldwin 85320 Madison is a residential Estate Series entry set. Where a rated opening is the requirement, the Corbin Russwin CL3110 is a Grade 1 vandal resistant passage lever with a fire rating for doors 1-3/4 inch to 2 inch, the Falcon K101 is a Grade 1 fire rated passage lock covering 1-3/8 inch to 2-1/4 inch, and the Arrow MK02-TA is a fire rated privacy lock with a Tudor knob for doors 1-3/4 inch to 2 inch. Match the function to the door: the Corbin Russwin and Falcon are passage, the Arrow is privacy.

The Baldwin 85320 Madison is an Entry function residential set, which does not cover the institutional functions those buildings specify. For classrooms, the Dexter C1000 Series is Grade 1 classroom function with a clutching keyed lever for doors 1-3/8 inch to 1-3/4 inch, and the C1000 classroom security version is the same Grade 1 build with classroom security function. For patient rooms and utility spaces the Dexter C1000 asylum function is Grade 1 across 1-3/8 inch to 2 inch, and the Arrow MK33-BD-CS is a Grade 2 asylum lock with a Schlage C keyway. For storerooms the Hager 2580 is Grade 2 with the Withnell lever for doors 1-3/8 inch to 2 inch.

The Baldwin 85320 Madison is a residential handleset, which is not a fleet standard for a commercial facility. For heavy duty standardization, the BEST 9K Series is Grade 1 heavy duty, the Falcon T101 is a Grade 1 heavy duty passage lever with pressure release technology in the T Series, and the Falcon K101 is Grade 1 heavy duty and fire rated in the K Series. If medium duty suits the interior openings, the BEST 7KC Series is Grade 2 medium duty and the Falcon B101 is a Grade 2 medium duty non-handed passage lever, which keeps the stockroom from carrying left hand and right hand parts.

The Baldwin 85320 Madison lever configurations are handed: the single cylinder and double cylinder handlesets with lever are ordered as LH Entry or RH Entry, and the full dummy with lever comes as LH Dummy or RH Dummy. The knob configurations are not split that way. If handing is a problem for your stock, the Falcon B101 is a Grade 2 passage lever with a non-handed design, the Falcon K101 is a Grade 1 passage lock with non-handed levers, and the Kwikset 200DL Delta passage lever is reversible.

The Baldwin 85320 Madison is a complete sectional trim entry set with a 5 5/16 inch lever grip and a 3 1/8 inch projection off the door face, supplied as a working handleset in single cylinder, double cylinder or dummy form. The Imperial USA ED-EL500HD is heavy duty escutcheon lever trim with entry function in the ED-500 Series, meaning it is the outside trim that mounts to an exit device rather than a self contained lock. The Corbin Russwin 585F715 is the same idea from another direction, a Grade 1 lock lever for the ED8000 pushpad exit device and CL3300 cylindrical series, for doors 1-3/4 inch to 2 inch. Order those only when there is a device on the door for them to attach to.

The 5445V Classic lever gives a 5-5/16 inch grip length. That is a full-hand lever, which is what you want on a door someone opens with an elbow or a loaded arm, and it is the reason people pick the lever over the 5015 Classic knob on a main entry.

Yes, and that is the usual reason to spec it. All fourteen finishes run across the configuration list, so an entry handleset with a knob, an entry handleset with a lever, and a full dummy for an inactive leaf can all be ordered in the same finish code, for example 056 Satin Nickel or 102 Oil-Rubbed Bronze. Keep in mind this is residential-duty hardware, so it suits front doors of homes and units rather than high-traffic common-area openings.