Baldwin 85345 Landon® Two-Point Lock Handleset w/ 5225 Egg Knob or 5255 Wave Lever
- Satin Nickel that is smooth and clean is a nickel-plated brass, bringing the beauty of the finish with the weight of brass. All covered by the Baldwin Limited Lifetime Finish™ Warranty, creating a crisp and clean look for both traditional and contemporary designs.
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Subcategory:
- Lever Handle
- Product Group:
- Mechanical Locks
- Lever Grip Length:
- 4"
- Lock Function:
- Entry
- Collection:
- Estate Series
- Commercial/Residential:
- Residential
- Product Subgroup:
- Bored Locksets
- Maximum Door Thickness:
- 2"
- Minimum Door Thickness:
- 1 3/8"
- Product Type:
- Leversets
- Product Model:
- 85345
- Product Projection:
- 3-7/32"
- Product Category:
- Mechanical Lock
- Department:
- Door Hardware
Baldwin 853450032ENT – Frequently Asked Questions
1) What does two-point locking mean on the Baldwin 85345 Landon handleset?
Two-point means the handleset throws at two locations on the door rather than one, worked from the single grip assembly. It is an Entry function set, so the exterior side is keyed and the interior side gives you either the 5225 egg knob or the 5255 wave lever. On a tall or wide entry door, engaging at two points is what keeps the slab pulled tight against the weatherstrip over a season of warping.
2) Do I have to specify handing when I order the Baldwin Landon 85345 handleset?
Only if you take the lever. Every lever version of the Landon is handed, ordered as LH or RH in each of the single cylinder entry, double cylinder entry, and dummy configurations. The interior knob versions are not handed, so if you are not sure which way the door swings, the 5225 egg knob avoids the question entirely. Stand outside the door: if the hinges are on your left it is left hand.
3) Should I order the single cylinder or double cylinder version of the Baldwin 85345?
Single cylinder is keyed outside with a thumbturn inside, which is what most entry doors take. Double cylinder needs a key on both sides, and that is what people specify when there is glass in or beside the door that someone could break to reach the turn. Check your local code first, since some jurisdictions restrict double cylinder on a required egress door. The Landon offers both in knob and in LH or RH lever.
4) Is the Baldwin 85345 Landon handleset suitable for a commercial building entrance?
No. The Landon is a residential Estate Series handleset, built for houses and the front doors of light residential work. For a commercial opening that needs a graded cylindrical lock, look at something like the Hager 2525 Grade 2 entry lever, which takes 1-3/8 to 2 inch doors, or the Corbin Russwin CL3100 Series CL3110 Grade 1 for heavier traffic on 1-3/4 to 2 inch doors.
5) Which levers look like substitutes for the Baldwin 85345 Landon entry handleset but will not lock the door?
Several lever sets are close in appearance and door thickness but are passage function, meaning no cylinder and no locking: the Hager 2510 Withnell is Grade 2 passage over 1-3/8 inch to 2 inch, the Arrow GL01 Sierra lever is Grade 2 passage over 1-3/4 inch to 2 inch, and the Bravura Atlanta, Orlando, Tampa and Miramar are all Grade 2 passage leversets. The Kwikset 200BRNL Breton is a Grade 3 passage lever. The 85345 Landon is an Entry function set, so none of these substitute for it on a door that must lock - they suit halls and closets.
6) What is the closest equivalent to the Baldwin 85345 Landon handleset for a commercial opening that needs a Grade 1 keyed lever?
The Baldwin 85345 Landon is a residential entry lockset with a 1-3/8 inch to 2 inch door thickness range. For a commercial opening needing a graded keyed lever, the Dexter C1000 Series Entry/Office lever is Grade 1 with an Entrance/Office function and a 1-3/8 inch to 1-3/4 inch door thickness range. The Falcon B511CP6D is Grade 2 medium duty with an Entrance/Office function. Note that both are cylindrical levers rather than a two-point handleset, so the exterior trim is a rose or escutcheon lever, not a full-length gripset.
7) What should I use instead of the Baldwin 85345 Landon on a door thicker than 2 inches?
The Baldwin 85345 Landon tops out at a 2 inch door thickness. For a thicker door, the Falcon K101 passage lock covers 1-3/8 inch to 2-1/4 inch, is Grade 1 heavy duty and fire rated with non-handed levers. Be aware that the K101 is a passage function with no keyed cylinder, so it does not replace the keyed entry capability of the 85345 - use it where the thick door does not need to lock.
8) The Baldwin 85345 Landon is not fire rated for my corridor door - what lever lock is?
Two comparable cylindrical locks carry a fire rating: the Falcon K101 is Grade 1 heavy duty, fire rated, passage function with non-handed levers over 1-3/8 inch to 2-1/4 inch, and the Corbin Russwin CL3110 is a Grade 1 vandal resistant fire rated passage lock in the CL3100 Series over 1-3/4 inch to 2 inch. Both are passage function, so pair them with a separate keyed device if the corridor opening also needs to lock. The Arrow MK02-TA is a Grade 1 privacy lock with a Tudor knob and a fire rating, for a bath or bedroom opening.
9) How far does the Baldwin Landon handleset stick out from the door face?
Projection is 3-7/32 inches off the face of the door. That is the number to check against a storm door or screen door swinging in front of it, and against a sidelight or door casing that the grip would collide with when the door opens back. The lever itself has a 4 inch grip length.
10) What is the dummy version of the Baldwin 85345 Landon for?
The full dummy set is for the inactive leaf of a pair of doors, or for a door that never latches. It has no cylinder and no latching mechanism, just the grip and the interior knob or lever mounted through the door for looks and for pulling. If you are doing a double entry door, you typically order one working handleset for the active leaf and one full dummy in the matching finish for the inactive one. The dummy comes with the interior knob, or as a handed LH or RH lever.
11) Can I match the Baldwin Landon handleset finish across all the doors on a house?
Fourteen finishes are offered, so matching a whole opening set is realistic: Polished Brass PVD, Non-Lacquered Brass, Vintage Brass, Satin Brass PVD, Satin Brass Black, Polished Nickel PVD, Satin Nickel, Satin Brass Brown, Graphite Nickel, Oil Rubbed Bronze, Venetian Bronze, Satin Black, Polished Chrome, and Distressed Oil Rubbed Bronze. The Satin Nickel is nickel plated over brass. Note that Non-Lacquered Brass and the distressed and vintage finishes are living finishes that change with handling, so they will not stay identical to a lacquered PVD finish over time.
12) I manage rental units and want keyless entry on the front doors. Is the Baldwin 85345 the right choice?
The Landon is key operated only, with a cylinder outside and either a thumbturn or a second cylinder inside depending on the version you order. For keyless on a tenant door, a keypad set is the better answer: the Delaney LP250 electronic keypad leverlock, the Emtek Classic keypad leverset, or a mechanical pushbutton set like the Lockey 2835 for doors 1-3/16 to 2 inches thick. Mechanical keypads have no batteries to change across a portfolio, which matters when you have dozens of doors.
13) Can I get the Baldwin Landon 85345 in a passage or privacy function for an interior door?
No. The Landon 85345 is built as an Entry function set, offered as single cylinder, double cylinder, or full dummy. There is no passage or privacy configuration. For a non-keyed interior door, a passage leverset such as the Bravura Atlanta or Orlando in Grade 2 handles hall and closet doors, and for a bed or bath door you want a privacy set like the Kwikset 300BRNL Breton, rated for 1-3/8 to 1-3/4 inch doors.
14) Is there a simpler decorative entry lever alternative to the Baldwin 85345 Landon handleset?
Yes. If the two-point handleset trim is more than the opening needs, Deltana offers decorative Entry function levers in the same door thickness territory: the 6201 Manchester, 6411 Morant and 6431 Linstead all list a 1-3/8 inch to 2 inch door thickness range, matching the 85345 range of 1-3/8 inch to 2 inch. The Deltana 5851 Claremont is also an Entry function lever. These are rose or plate mounted levers rather than a full-height gripset with a knob or lever on the interior.
15) I need a keyless entry option instead of a keyed Baldwin 85345 Landon handleset - what are my choices?
The 85345 Landon is a keyed Entry function set. For keyless operation on a similar door, the Lockey 2835 mechanical pushbutton keyless lever lock is ADA compliant with a 1 3/16 inch to 2 inch door thickness range, and the Lockey 2835DC adds a double combination over the same 1 3/16 inch to 2 inch range. The Lockey 1150 heavy duty keypad lever set covers 1-1/8 inch to 2 inch. The Delaney LP250 is an electronic keypad leverlock at Grade 2. All of these are lever trim, so the exterior appearance departs from a gripset handleset.
16) What is a comparable dummy lever to the Baldwin 85345 Landon full dummy set for an inactive door?
The Landon 85345 is offered in full dummy set configurations with an interior knob and in left hand and right hand dummy lever versions. If a plain dummy lever is enough, the Accentra 455LN Augusta is a Grade 1 dummy in the 5400 Series, the BEST 9K Series 1DT is a Grade 1 heavy duty non-keyed single dummy trim, the BEST 7KC Series 1DT is a Grade 2 medium duty single dummy trim, and the Callan Bentley is a Grade 2 dummy lever. Emtek supplies dummy pairs including the Arts and Crafts lever and the Cortina lever from the Classic Brass range for double door applications.
17) What is a lower cost alternative to a Baldwin Landon 85345 for a rental entry door?
For a keyed entry door where the decorative gripset is not required, the Cal-Royal AUS00 is a Grade 3 Entrance/Office lever with a solid brass forged body and a 1-3/8 inch to 1-3/4 inch door thickness range, the Callan Artino is a Grade 3 entrance leverset, and the Master Lock RL Series return style lever is a Grade 3 keyed entry lockset. The Callan Bennett is a Grade 3 entrance leverset supplied as a deadbolt combo, which gives the two locking points that the Landon achieves in one handset assembly.
18) Is there an entry lever with a Schlage C keyway to key alike with an existing Baldwin Landon 85345 opening?
For openings that must key into a Schlage C system, the Cal-Royal AG00 entrance lever is a Grade 2 set with a 6-pin Schlage C keyway keyed different and a 2-3/8 inch backset, over a 1-3/8 inch to 1-3/4 inch door thickness range. The Cal-Royal AG05 is a Grade 2 storeroom lever with a deadlocking latchbolt over the same 1-3/8 inch to 1-3/4 inch range. If existing Yale hardware is in the mix, the Accentra 107S is a Schlage cylinder adapter kit for Yale hardware.
19) For a school or institutional door, what replaces a residential Baldwin 85345 Landon entry set?
The Landon 85345 is a residential entry set. Institutional openings are usually specified by function: the Dexter C1000 Series Classroom lever is Grade 1 clutching and keyed over 1-3/8 inch to 1-3/4 inch, and the C1000 Classroom Security version is Grade 1 clutching and keyed over the same 1-3/8 inch to 1-3/4 inch range. For utility and behavioral health openings, the Dexter C1000 Asylum (F87) is Grade 1 over 1-3/8 inch to 2 inch, and the Arrow MK33-BD-CS is a Grade 2 heavy duty asylum lock with a ball knob and a conventional Schlage C keyway cylinder. The Hager 2580 is a Grade 2 storeroom lock with a Withnell lever over 1-3/8 inch to 2 inch.
20) What is the difference between the Baldwin 85345 Landon and a knob style entry lockset like the Arrow HK11?
The Landon 85345 is a two-point handleset with a choice of a 5225 egg knob or a 5255 wave lever on the interior, in handed left hand and right hand entry versions where the lever is chosen, and it covers 1-3/8 inch to 2 inch doors. The Arrow HK11-BB is a turn-pushbutton entrance lock with a ball knob and a conventional cylinder, Grade 2, over 1-3/8 inch to 1-3/4 inch. The Arrow is a single point cylindrical lock operated by a pushbutton on the inside knob, so it is not handed the way the Landon lever versions are, and it does not carry the exterior gripset.
21) Can a Hager 2525 or 2540 replace a Baldwin 85345 Landon entry handleset?
Both cover the same door thickness territory as the Landon 85345. The Hager 2525 is a Grade 2 commercial cylindrical entry lock with a lever handle over 1-3/8 inch to 2 inch, and the Hager 2540 is a Grade 2 lock with a Withnell lever over 1-3/8 inch to 2 inch listed with an Entrance function. What changes is the trim: the Landon presents a full-length gripset on the exterior with an egg knob or wave lever inside, while the Hager sets are rose-mounted levers on both sides. Use the Hager where the appearance of the opening does not matter; keep the Landon where the entry is a front door.
22) Is the interior lever on the Baldwin Landon long enough to be comfortable for older residents?
The 5255 wave lever has a 4 inch grip length, which gives a full hand purchase and lets someone operate the door with a forearm or a closed fist rather than a grasping motion. That is the practical reason to take the lever over the 5225 egg knob on a door used by residents with limited hand strength. Remember the lever is handed, so order LH or RH to match the door swing.
How fast can I get the Baldwin 853450032ENT delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 853450032ENT come with a warranty?
Absolutely. The Baldwin 853450032ENT is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 853450032ENT?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 853450032ENT from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.