Baldwin Estate 5025 Single Dummy Preconfigured 5025 with 5048 Rose

No latch, and it doesn't turn. The 5025 is a half dummy, meaning a single knob on a single mounted rose with no latchbolt, no spindle through the door, and no working mechanism. It surface mounts to one face of the door and gives you something to pull on. Use it on the inactive leaf of a French pair, on a closet or pantry door held shut by a ball catch or roller catch, or on a false door where you want the trim to match the working openings. If the door has to latch, you need a passage set instead.

Both 1-3/8 and 1-3/4 inch doors are covered. Since the 5025 half dummy mounts to one face only and has no latch, the door does not need a bored edge for it, which is why an unbored slab or an inactive French door leaf is fair game. The knob measures 1-1/2 x 2-1/2 inches with a 2-1/4 inch projection, so budget that projection off the door face when there is a wall, a jamb, or a second leaf close by.

Residential. The Estate 5025 is a residential-line knob, and the buyer who needs a graded commercial cylindrical knob should look elsewhere. For Grade 1 heavy duty, the Corbin Russwin CK4310 passage knob covers 1-3/8 to 2 inch doors and the Schlage D10S passage is Grade 1 heavy duty. If you specifically need a commercial dummy trim, the Schlage A170 single dummy is Grade 2 heavy duty for 1-3/8 to 1-7/8 inch doors, and the BEST 6K single dummy trim is Grade 2 medium duty.

A half dummy such as the Baldwin Estate 5025 supplies trim for a single face. For openings that need a knob on both sides of the same door, Emtek sells dummy knobsets as pairs: the Arts and Crafts Hammered Egg dummy pair, the Classic Brass Crystal Georgetown knob dummy pair, and the Classic Brass Crystal Providence knob dummy pair are each supplied as two knobs. The Emtek Porcelain knobs with threaded rod also ship two knobs per set. Count faces, not doors: a pair of French doors with a knob on each interior face needs two dummy trims per leaf handled that way.

No - the Baldwin Estate 5025 is a half dummy with a non-keyed, non-locking function, so it neither latches nor privacy-locks. A bed or bath door needs a privacy set: the Deltana 6112 St. Thomas knob privacy covers 1-3/8 inch to 2 inch doors, the Dexter C2000 privacy is a Grade 2 non-clutching ball knob for 1-3/8 inch to 1-3/4 inch doors, the Pamex FTF Baron privacy is Grade 3 for 1-3/8 inch to 1-3/4 inch, and the Cal-Royal BER20 is a Grade 3 privacy knob lock with brass trim for the same thickness range.

The Baldwin Estate 5025 is a half dummy knob, non-keyed, on a 5048 rose. The nearest commercial-brand counterparts in dummy function are the Schlage A170, a Grade 2 heavy duty single dummy trim cylindrical knob, and the BEST 6K Series 6K-1DT, a Grade 2 medium duty single dummy trim non-keyed cylindrical knob. Both are single dummy trim like the 5025, so they mount one knob on one face with no latch. The Baldwin is a residential Estate Series solid forged brass knob; the Schlage and BEST are graded cylindrical lines, so the difference is construction and finish program rather than function.

A half dummy has no latch, so an opening that must stay shut needs a passage set. For residential-look brass, the Omnia 434/PA is a traditional egg-shaped knob latchset in solid brass with a 3 inch projection. For graded commercial passage knobs, the Schlage D10S is a Grade 1 heavy duty passage latch with an orbit knob, the Corbin Russwin CK4310 is a Grade 1 passage/closet cylindrical lock with a global knob, and the Falcon W101 is a Grade 2 medium duty passage/closet knob lock with a 2-3/4 inch backset. The Baldwin 5025 uses a 2-3/8 or 2-3/4 inch backset, so a 2-3/4 inch backset passage set drops into the same bore spacing on a standard commercial prep.

The Baldwin Estate 5025 works with 1-3/8 inch and 1-3/4 inch thick doors. For a 2 inch door, the Deltana 3381 Egg Knob entry, the Deltana 6171 Round Knob entry and the Deltana 6112 St. Thomas privacy knob each cover 1-3/8 inch to 2 inch, and the Corbin Russwin CK4310 Grade 1 passage/closet lock and CK4851 entrance/office lock also run 1-3/8 inch to 2 inch. The Falcon X101 goes to 2-1/4 inch. Those are latching functions rather than dummy trim, so confirm the function the opening needs before ordering.

The Baldwin Estate 5025 is non-keyed dummy trim. For a keyed opening, the Cal-Royal BER00 is a Grade 3 entrance/office knob lock with a Kwikset keyway for 1-3/8 inch to 1-3/4 inch doors, the Kwikset 400P-CP Polo is a Grade 3 keyed entry knob for the same range with a round corner adjustable latch and strike, the Dexter C2000 entry/office is a Grade 2 keyed ball knob, and the Corbin Russwin CK4851 is a Grade 1 entrance/office cylindrical lock with a conventional cylinder for 1-3/8 inch to 2 inch doors. If the site is already keyed to a Kwikset keyway, the BER00 keys into it directly.

Handing is not a factor. The 5025 knob is reversible, so one part number covers left and right hand openings and there is nothing to specify or field reverse. For a property manager stocking a spare, that means a single item covers every door in the building.

That is what the Estate 5025 is built for. It is the same knob and the same 5048 rose used on the functioning Estate sets, so the dummy on a closet or an inactive leaf reads identically to the latching knob next to it in the same finish. Pick the finish once and carry it across the openings. Eleven are offered: Polished Brass PVD, Non-Lacquered Brass, Vintage Brass, Satin Brass PVD, Polished Nickel PVD, Lifetime PVD Satin Nickel, Lifetime PVD Graphite Nickel, Oil Rubbed Bronze, Venetian Bronze, Satin Black, and Polished Chrome.

Either standard backset works: 2-3/8 or 2-3/4 inch, with a 1 inch edge bore. That matters when you are swapping the 5025 dummy onto a leaf that was previously bored for a working lock, since both common residential borings are covered and you will not have to plug or re-drill. On a door that has never been bored, the half dummy mounts to the face and the boring question does not arise at all.

The Bravura Biloxi is a dummy knobset with round trim, Grade 2, so it matches the Baldwin Estate 5025 on function - both are dummy trim with no latch and no keying. They differ in the rest: the 5025 is a solid forged brass Estate Series knob preconfigured with the 5048 rose and offered in eleven finishes including 031 Non-Lacquered Brass, 076 Lifetime PVD Graphite Nickel and 190 Satin Black. If the job is matching an existing Baldwin Estate opening, the rose and finish program is what has to line up, not just the dummy function.

The Baldwin Estate 5025 is a residential half dummy knob. Facilities standardizing on ANSI grades usually build the opening schedule from a single graded line: the BEST 8K Series carries Grade 1 heavy duty in entrance function, the Sargent 8XG04 is a Grade 1 heavy duty storeroom/closet knob lock with a 2-3/4 inch backset, and the Falcon X Series X101 is a Grade 1 heavy duty passage knobset with an interchangeable core and a 1-3/8 to 2-1/4 inch door thickness range. Where the schedule calls for dummy trim within a graded program, the Schlage A170 Grade 2 single dummy trim and the BEST 6K-1DT Grade 2 single dummy trim sit inside those families.

Both are dummy knobs with no latch. The Cal-Royal BA40 is a Barrington BA Series dummy knob cylindrical lock rated for 1-3/8 inch to 1-3/4 inch doors; the Baldwin Estate 5025 is a half dummy in solid forged brass, preconfigured with the 5048 rose, reversible, and offered in eleven finishes from 003 Polished Brass PVD through 260 Polished Chrome. Both cover the same 1-3/8 inch and 1-3/4 inch doors, so the choice comes down to the trim appearance and finish match on the rest of the openings.

No. The Sargent 78-2875 is an outside knob only with B design from the 7800 Series, which is exit device trim, and the Sargent 28C-KNOB is exit device trim with knob and rose in entrance function for 1-3/4 inch doors. Both mount to an exit device, not to a bored door prep. The Baldwin Estate 5025 is a bored cylindrical half dummy with a 1 inch edge bore and a 2-3/8 or 2-3/4 inch backset prep. Same knob-on-a-rose appearance, different mounting entirely.

Solid forged brass, not plated pot metal, so the knob itself takes handling. On finish: the PVD options (Polished Brass PVD, Satin Brass PVD, Polished Nickel PVD, Lifetime PVD Satin Nickel, Lifetime PVD Graphite Nickel, Polished Chrome) are the durable choice for high-traffic corridors. Non-Lacquered Brass is a living finish, it will darken and patina with handling by design, which is right for a period residence and wrong for a unit where every door has to look the same in five years.

The Baldwin Estate 5025 is reversible, so one part covers a left- or right-hand opening. Among comparable dummy trims, the Schlage A170 is Grade 2 heavy duty single dummy trim in the A Series and the BEST 6K-1DT is Grade 2 medium duty single dummy trim - dummy trim carries no latch or handing mechanism, so all three are ordered on finish and rose rather than on hand. Order handing matters again as soon as the function changes to a latching or keyed set.