You may also like
Baldwin Estate 5073 Half Dummy Knob w/ 5046 Rose
FEATURES
- Knob or lever set paired with roses without a privacy or locking feature to close and secure any door with the 2.125" standard door preparation.
- Passage sets include everything needed to install the lock onto your door.
- Our Lifetime Satin Nickel finish is create by nickel-plating solid brass, to bring about the beauty of the warm and smooth silver tone, combined with the weight and quality of brass. This satin, matte-like PVD finish is extremely durable and is backed by our Limited Lifetime Finish™ Warranty.
- This style is featured in Quick Ship as part of a complete Passage, Privacy, Full Dummy or Half Dummy set.
- Dependability, quality, and high design. Baldwin's Quick Ship items are ready to ship to you within 5 business days from ordering.
INSTALLATION AND sUPPORTINSTALLATION GUIDEWARRANTY
Manufacturer Resources
Baldwin 2025 Cabinet Hardware Lookbook
Product Specs
- Product Type:
- Knob Handle
- Subcategory:
- Door Knobs
- Product Subgroup:
- Bored Locksets
- Commercial/Residential:
- Residential
- Collection:
- Estate Series
- Knob Diameter:
- 2.25"
- Maximum Door Thickness:
- 1.75"
- Minimum Door Thickness:
- 1.37"
- Product Attribute:
- Cylindrical Locks
- Product Group:
- Mechanical Locks
- Product Model:
- 5073.IDM
- Product Function:
- Dummy
- Product Projection:
- 2.5"
- Department:
- Door Hardware
Baldwin 5073003IDM – Frequently Asked Questions
1) Does the Baldwin 5073 half dummy knob need a 2-1/8 inch bore in the door?
No. A half dummy mounts to the face of the door and needs no cross bore or latch prep. The 2.125 inch standard door preparation referenced for this style applies to the functional versions (passage, privacy, full dummy) in the same Estate knob family. If your door already has a 2-1/8 inch bore from a previous knob, the 5046 rose will cover it, but a blank door works too.
2) Will the Baldwin Estate 5073 knob work on a 1-3/8 inch door?
Yes. The stated door thickness range runs from 1.37 inches up to 1.75 inches, so it covers both the 1-3/8 inch interior doors common in older homes and standard 1-3/4 inch doors.
3) I need dummy knobs on both sides of a closet door. Is the 5073 the right part?
No, order a full dummy for that. The 5073 is a half dummy, meaning one knob for one face. Two of them is not the same part as a full dummy set, which pairs knobs on both faces. The same Estate knob style is offered in passage, privacy, full dummy, and half dummy configurations, so pick the configuration that matches the door.
4) What finishes does the Baldwin Estate 5073 half dummy knob come in?
Eleven: 003 Polished Brass, 031 Non-Lacquered Brass, 033 Vintage Brass, 044 Satin Brass, 055 Polished Nickel, 056 Satin Nickel, 076 Graphite Nickel, 102 Oil-Rubbed Bronze, 112 Venetian Bronze, 190 Satin Black, and 260 Polished Chrome. If you are matching existing Baldwin hardware on other doors, order by that two- or three-digit finish number rather than by name, since 031 Non-Lacquered Brass is a living finish that will patina and 102 Oil-Rubbed Bronze changes with wear.
5) How far does the Baldwin 5073 knob stick out from the door?
Projection is 2.5 inches off the door face, and the knob itself is 2.25 inches in diameter. Worth checking against a narrow hallway, a door that swings against a wall, or a bifold where clearance to the adjacent panel is tight.
6) Is the Baldwin Estate 5073 rated for commercial use?
It is classified as residential hardware in the Estate Series. For apartment interiors, model units, hospitality guest rooms, and similar light-traffic decorative openings it is a fit. For a commercial corridor or a high-cycle opening, specify a graded commercial lockset instead, though a dummy knob carries no latch and sees far less abuse than a functional set either way.
7) What is the Baldwin model number to order for this half dummy knob?
The model is 5073.IDM, which is the Estate 5073 knob on the 5046 rose in half dummy configuration. Add the finish number to specify the trim, for example 056 for Satin Nickel.
8) Does the Baldwin 5073 half dummy come with mounting screws?
Yes, the sets in this Estate knob family ship with everything needed to mount to the door, so no separate screw pack or latch is required for a half dummy install. Baldwin publishes an installation guide for the interior latch prep used across the style.
9) Is the Satin Nickel version of the Baldwin 5073 solid brass?
The 056 Satin Nickel is nickel plating over solid brass, applied as a satin matte PVD finish, so you get the silver tone with the weight of a brass knob underneath.
How fast can I get the Baldwin 5073003IDM delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 5073003IDM come with a warranty?
Absolutely. The Baldwin 5073003IDM is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 5073003IDM?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 5073003IDM from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.