Baldwin L029 GRAMERCY LEVER WITH R017 ROSE- Left Hand HALF DUMMY

The Baldwin L029 Gramercy half dummy is trim only. There's no latch, no cylinder, and no moving mechanism, so the lever is fixed and does not retract anything. It mounts to one face of the door as a pull, which is what you want on a closet door held by a ball catch or roller catch, or on the inactive leaf of a pair. It's non-keyed with no privacy or locking function.

Half dummy gives you one lever for one side of the door. That's the Gramercy L029 half dummy. If you need levers on both faces, as on French doors or a double closet where both sides get a pull, you need a full or double dummy instead, or a dummy pair such as the Emtek Classic Cortina dummy pair. Ordering half dummy when you wanted both sides is the most common mistake on this part.

Yes. The Gramercy lever with R017 rose is built to the standard 2-1/8 inch door prep, with a 1 inch edge bore and a 2-3/8 inch backset. If your door already carries a tubular lockset with that prep, the dummy drops onto the same holes. Door thickness range is 1-3/8 to 1-3/4 inches.

No. Maximum door thickness on the Gramercy L029 half dummy is 1.75 inches, minimum 1.375 inches. For a 2 inch door you need a lever rated for that range, for example the Hager 2510 passage lever, which covers 1-3/8 to 2 inches, or the Deltana 6201 Manchester entry lever at 1-3/8 to 2 inches.

The Baldwin L029 Gramercy is a half dummy residential leverset. For commercial openings, the BEST 9K Series 1DT is a Grade 1 heavy duty single dummy trim cylindrical lever lock, and the Accentra 455LN Augusta is a Grade 1 heavy duty single dummy cylindrical lever lock in the 5400 Series. Both are dummy function like the Gramercy, meaning no latch and no locking, but they carry commercial ANSI grading and heavy duty construction.

The Baldwin L029 Gramercy is a half dummy, so it supplies trim for one face only. For a non-latching door that needs a lever on each face, Emtek sells its Arts and Crafts lever and Hammered lever as dummy pairs, and the Classic Brass Cortina lever is also offered as a dummy pair. A pair covers both faces of a single door or the two active leaves of a set of French doors.

The Baldwin L029 Gramercy is a non-keyed half dummy, so it is pull trim only with no latchbolt. If the door has to latch, a passage leverset is the equivalent function: the Bravura Tampa is a Grade 2 passage leverset with square trim, the Callan Asheville is a Grade 3 passage leverset, and the Kwikset 200BRNL Breton is a Grade 3 passage lever for doors 1-3/8 inch to 1-3/4 inch thick. Passage sets latch the door but still do not lock.

No. The Baldwin L029 Gramercy is a half dummy - the lever is fixed, there is no latch and no locking. A passage set such as the Falcon B101 Grade 2 cylindrical passage lever or the Design Hardware J75 Grade 2 passage lever lockset has a working latchbolt and a rotating lever that retracts it. If the door already has a functioning latch and you only need replacement pull trim on one face, the half dummy is the correct part; if the door needs to stay shut on its own, a passage set is.

The lever handing is listed as reversible, so the lever can be set to point either direction on the door. Left hand describes how it is presented, not a restriction that locks you into one side of the opening.

Eight: Satin Brass (044), Polished Nickel (055), Satin Nickel (056), Graphite Nickel (076), Oil Rubbed Bronze (102), Venetian Bronze (112/11P), Satin Black (190), and Polished Chrome (260). Those are Baldwin's standard finish codes, so a dummy specified in, say, 056 will match the working levers you already ordered in 056 across the rest of the house.

The Gramercy dummy is non-keyed with no latch, so it cannot secure a door. For the adjacent opening you want a latching function in the same finish: passage for a hall or closet, privacy for a bed or bath, entry where you need a key. Grade 2 residential-style options in the same vein include the Callan Bentley Grade 2 dummy lever if you need another dummy, or a Bravura Tampa square-trim passage leverset for a square rose look.

The Baldwin L029 Gramercy is non-keyed with no locking feature, so it will not secure a bedroom or bath. For those openings use a privacy function set such as the Kwikset 300BRNL Breton privacy lever, a Grade 3 privacy set for doors 1-3/8 inch to 1-3/4 inch thick, or the Arrow MK02-TA privacy cylindrical lock with a Tudor knob, which carries a fire rating.

The Baldwin L029 Gramercy is non-keyed, so it cannot be keyed. For a keyed lever on the same door, options include the Hager 2525 Grade 2 cylindrical entry lock for doors 1-3/8 inch to 2 inch thick, the Cal-Royal AG05 Grade 2 storeroom lever with a deadlocking latchbolt, and the Deltana 6201 Manchester entry lever for doors 1-3/8 inch to 2 inch. Entry allows the inside lever to be locked; storeroom keeps the outside lever locked at all times.

The Baldwin L029 Gramercy half dummy covers doors from 1-3/8 inch to 1-3/4 inch thick. For thicker doors, the Falcon K101 Grade 1 passage lock covers 1-3/8 inch to 2-1/4 inch, the Dexter C1000 asylum function covers 1-3/8 inch to 2 inch, and the Corbin Russwin CL3110 Grade 1 vandal resistant passage lever covers 1-3/4 inch to 2 inch. Those are latching functions rather than dummy trim, so confirm the function suits the door before substituting.

Projection is 2.53 inches, with a lever grip length of 4.625 inches. Worth checking against a door that swings back against a wall or sits near a cabinet run, since the lever will not clutch or give.

The Baldwin L029 Gramercy uses the R017 rose, a square rose shape. If neighboring doors need a latching lever with matching square trim, the Bravura Tampa passage leverset is a Grade 2 set with square trim. Round-trim alternatives such as the Bravura Atlanta and Bravura Orlando passage leversets, both Grade 2, would break the square look.