You may also like
BALDWIN RESERVE 1435 RADIUS CORNER HINGE 3.5"X 3.5"-1/4" OVERVIEW
KEY FEATURES
- 1/4" Radius Corner Hinge is beveled on the inside leaf to obtain a tight fit when viewing the hinge in a closed position.
- 3.5" x 3.5"
- Machined for precise installation and smooth movement and furnished with stainless steel, rust-proof pins for added durability.
- Baldwin Hardware has a rich tradition of high-quality, master craftsmanship, solid brass products. A difference you can both feel and see.
FEATURES
- PACKED: One per box, each hinge poly-bagged with fasteners.
- Supplied with #10 x 1” Flat Head-Phillips wood screws.
- NOTE: NON-REMOVABLE PINS (NRP) NOT AVAILABLE on radius corner hinges. Hinge thickness: .093”
RESOURCES & DOWNLOADS
Manufacturer Resources
Product Specs
- Product Group:
- Door Hinges and Pivots
- Corner Style:
- 1/4" Radius Corners
- Product Subgroup:
- Full Mortise Hinges
- Product Type:
- Hinges
- Subcategory:
- Full Mortise Hinges
- Commercial/Residential:
- Residential
- Collection:
- Reserve Series
- Product Model:
- 1435
- Product Size:
- 3.5"x 3.5"
- Product Category:
- Door Hinges and Pivots
- Department:
- Door Hardware
Baldwin 1435003I – Frequently Asked Questions
1) I need a 1/4 inch radius corner hinge but 3.5 inch is too small for my door. What else is there?
Step up to a 4 inch. The Orca Hardware 4" x 4" x 1/4" radius corner plain bearing commercial hinge (4014 Series) uses the same 1/4 inch radius pocket in a larger leaf. Orca also lists the same corner radius in 3.5" x 3.5" (3514 Series) if you want a commercial-duty match at the Baldwin's size instead. The Baldwin 1435 itself only comes 3.5 x 3.5.
2) What is the closest match to a Baldwin Reserve 1435 hinge if I need the same 3-1/2 inch size with 1/4 inch radius corners?
The Orca Hardware 3514 Series is a 3.5 inch by 3.5 inch hinge with 1/4 inch radius corners, the same size and corner cut as the Baldwin Reserve 1435, and it is a plain bearing hinge rated medium duty. The Baldwin 1435 is a Reserve Series hinge in a 3.5 inch by 3.5 inch size with 1/4 inch radius corners, beveled on the inside leaf for a tight closed appearance, and it comes in 15 decorative finishes including 003 Polished Brass PVD, 190 Satin Black and 102 Oil Rubbed Bronze. If the mortise in the door and jamb is already cut for a 1/4 inch radius, either one drops into the same prep.
3) I need a non-removable pin on an out-swinging exterior door. Can I use the Baldwin Reserve 1435?
No. Non-removable pins are not available on the Baldwin Reserve 1435 radius corner hinge. When the pin has to be secured against removal from the outside, the Deltana CSB45N is a 4-1/2 inch by 4-1/2 inch square hinge pair furnished with a non-removable pin, the Hager BB1168 NRP is a heavy duty full mortise ball bearing hinge with a non-removable pin, and the Deltana DE44R5TA is a 4 inch by 4 inch security hinge with 5/8 inch radius corners in steel. Those NRP options are larger than the 3.5 inch by 3.5 inch Baldwin, so the mortise will need to be enlarged.
4) Can I specify the Baldwin Reserve 1435 on a commercial opening, or do I need something else?
The Baldwin Reserve 1435 is a residential hinge. For commercial openings the comparable set is built around commercial-rated hinges: the Orca Hardware 3514 Series is a 3.5 inch by 3.5 inch by 1/4 inch radius corner plain bearing commercial hinge at medium duty, the Ives 3CB1 is a steel 3 knuckle concealed bearing full mortise hinge at medium duty, and the Ives 3CB1HW is a steel heavy weight concealed bearing full mortise hinge with 3 knuckles at heavy duty. The Orca 3514 is the one that keeps the same 3.5 inch size and 1/4 inch radius corner prep.
5) My existing door hinges have square corners, not radius. What 3-1/2 inch hinge should I order instead of the Baldwin 1435?
The Baldwin Reserve 1435 is cut with 1/4 inch radius corners and will not sit correctly in a mortise routed with square corners. For a square corner prep in the same 3.5 inch by 3.5 inch size, the Emtek 91013 is a residential plain bearing hinge pair with square corners in plated steel, the Emtek 92013 is a heavy duty plain bearing pair with square corners, the Emtek 94013 is a heavy duty ball bearing pair with square corners, and the Schlage Residential S3P1010 is a 3.5 inch by 3.5 inch square corner plain bearing mortise hinge sold three to a pack. Confirm the corner radius on the door before ordering, since corner style is what decides whether the leaf seats flush.
6) Is a Delaney 3-1/2 inch residential hinge a drop-in replacement for a Baldwin Reserve 1435?
Not in the same mortise. The Delaney DLY-RH35xx is a 3-1/2 inch by 3-1/2 inch bulk steel residential interior hinge pair with a 5/8 inch radius, while the Baldwin Reserve 1435 is cut with 1/4 inch radius corners. The leaf size matches but the corner arc does not, so a 5/8 inch radius leaf will leave a gap in a prep routed for 1/4 inch and a 1/4 inch leaf will not fill a 5/8 inch prep. Measure the corner on the hinge coming out before you order either one.
7) How many Baldwin 1435 hinges do I need to order for one door, and do they come with screws?
Order one per hinge location, since the 1435 is packed one hinge per box, each poly-bagged with its fasteners. A typical interior door takes three, so that's three boxes. Screws are included: #10 x 1 inch flat head Phillips wood screws. Note that several comparable residential hinges are sold as pairs rather than singles, so don't assume the quantity carries over between brands.
8) Are the #10 x 1 inch screws that come with the Baldwin 1435 long enough for an exterior door?
The 1435 ships with #10 x 1 inch flat head Phillips wood screws, which bite into the jamb only, not the framing behind it. On an exterior or heavier door, most installers swap the top hinge center screw for a 3 inch screw that reaches the stud so the door doesn't sag. The supplied screws are fine for a normal interior door.
9) What finishes does the Baldwin Reserve 1435 hinge come in so I can match the rest of my Reserve trim?
Fifteen finishes, spanning the Reserve palette: 003 Polished Brass PVD, 031 Non-Lacquered Brass, 033 Vintage Brass, 044 Satin Brass PVD, 050 Satin Brass Black, 055 Polished Nickel PVD, 056 Lifetime PVD Satin Nickel, 060 Satin Brass and Brown, 076 Lifetime PVD Graphite Nickel, 102 Oil Rubbed Bronze, 112 Venetian Bronze, 151 Antique Nickel, 190 Satin Black, 260 Polished Chrome, and 402 Distressed Oil Rubbed Bronze. Order by the Baldwin finish number and the hinge will match levers and trim carrying the same number.
10) How thick is the leaf on the Baldwin 1435 hinge, and will it change my door gap?
Leaf thickness is .093 inch. That's the depth you rout the mortise to so the leaf sits flush with the jamb and door edge. If you mortise for .093 and the old hinge was thicker or thinner, the door will move toward or away from the strike jamb, so check the gap before you hang it.
11) I need to run power through the door for an electrified lock. Will the Baldwin Reserve 1435 work?
The Baldwin Reserve 1435 is a plain 3.5 inch by 3.5 inch residential hinge with stainless steel pins and no conductor path through the barrel. To carry power from frame to door you need an electric transfer hinge: the Command Access ETH-CB70 is a 3 knuckle standard weight steel base energy transfer hinge, the Command Access ETH-BB68 is a 5 knuckle heavy duty steel base version, and the BEST CECB179-12C is a steel full mortise concealed bearing electrified hinge with a 12 wire quick connect. If you also need to report whether the door is closed, the Command Access ETM-CB70 and ETM-BB68 add door position sensing to the same transfer function.
12) What is the difference between the Baldwin Reserve 1435 and an Ives 1010RP or Schlage S3P1010 residential hinge?
All three are full mortise residential hinges. The Ives 1010RP is a steel plain bearing residential hinge with square corners sold as a set of 3 and rated medium duty, and the Schlage Residential S3P1010 is a 3.5 inch by 3.5 inch square corner plain bearing mortise hinge in a pack of 3, also medium duty. The Baldwin Reserve 1435 differs on two points that matter at the door: it has 1/4 inch radius corners rather than square, and it ships one hinge per box, each poly-bagged with #10 by 1 inch flat head Phillips wood screws, so you order per leaf rather than per set. It is also offered in 15 decorative finishes such as 055 Polished Nickel PVD, 112 Venetian Bronze and 031 Non-Lacquered Brass.
13) I need the door to self-close. Is there a version of the Baldwin 1435 that does that?
The Baldwin Reserve 1435 is a standard full mortise hinge and does not close the door on its own. For a self-closing leaf, the Stanley Security 2060R is a full mortise spring hinge with square corners in a 4.5 inch by 4.5 inch size on a ferrous steel base, rated heavy duty. That is a larger leaf with a square corner, so it needs a different mortise than the 3.5 inch by 3.5 inch radius corner prep the Baldwin uses.
14) Why does the Baldwin 1435 hinge have a bevel on the inside leaf?
The inside leaf is beveled so the hinge closes up tight with no visible gap at the barrel when the door is shut. It's a fit and appearance detail on the 1/4 inch radius corner hinge, which matters on a Reserve opening where the hinge is on show. It does not change how the hinge mortises in.
15) Will the pins on the Baldwin 1435 hinge rust on a humid or coastal opening?
The pins are stainless steel and rust-proof, so the pin itself isn't the corrosion risk. The leaf finish is what to pick around the environment, and the 1435 comes in PVD options like 003 Polished Brass PVD, 055 Polished Nickel PVD and 056 Lifetime PVD Satin Nickel, versus 031 Non-Lacquered Brass, which is meant to patina over time rather than hold its as-shipped look.
16) Do I need to specify handing when I order a Baldwin 1435 hinge?
No handing to specify. The 1435 is a standard full mortise butt hinge with a removable pin, so the same hinge works on a left or right hand door, you just orient it and drop the pin in. The only thing to choose is the finish. Handing does come up on some hinges, for instance the Stanley CECB1900R54L electrified hinge is a left-handed part, but that's not a concern here.
17) Which hinge gives the same decorative look as the Baldwin Reserve 1435 but in a larger size?
The Baldwin Reserve 1435 carries the decorative finish range - 15 options including 033 Vintage Brass, 044 Satin Brass PVD, 076 Lifetime PVD Graphite Nickel and 402 Distressed Oil Rubbed Bronze - in a 3.5 inch by 3.5 inch leaf. At a larger size, the McKinney SQ3331 is a square barrel 2 knuckle decorative hinge in 4-1/2 inch by 4-1/2 inch, standard duty, and the Deltana DE44R5TA is a 4 inch by 4 inch hinge with 5/8 inch radius corners. The McKinney trades the five knuckle barrel for a square two knuckle profile, which reads differently on the jamb.
How fast can I get the Baldwin 1435003I delivered?
Most orders ship the same day from our distribution partners, with quick delivery throughout the
continental
U.S.
Need it urgently? Contact Us for expedited shipping options.
Can I return it if it doesn’t work for me?
Yes—ZenSupply offers a hassle-free return policy. If the product isn’t the right fit,
reach out to our support team for a return authorization or setup a return by following our return instructions.
Does the Baldwin 1435003I come with a warranty?
Absolutely. The Baldwin 1435003I is backed by a manufacturer’s warranty.
For full warranty terms, check the product documentation or Contact Us.
How do I get technical support or installation help for the Baldwin 1435003I?
You can call, text, or email our expert support team for fast answers. We’re here to help with
product
selection,
installation tips, and troubleshooting. Contact Us
Why buy the Baldwin 1435003I from ZenSupply?
ZenSupply makes it easy to get the commercial door hardware you need—fast shipping, expert support,
and
rewards on
every order.
Our team is always ready to help you choose the right product for your project.